Loewe Spheros R 37 Handling the fabric hose, Using the conditional access module, Switching on

Page 12
Contact side

First installation

If the reception conditions are good, then a room antenna may be used for DVB-T. Passive and active room antennas are available on the market. The pow- er is supplied for an active antenna via the antenna connection. For automatic programming or in "TV Menu – Connections – Antenna DVB – Antenna DVB-T," the distribution voltage (5 volts) is to be set correspondingly.

It may be practical to use a nondirectional antenna. If the location is outside the normal transmitting range, then a unidirectional antenna may also be used to improve the reception quality.

You can find out more on the digital stations that can be received in your area at your specialist dealer.

If a set was retrofitted with a PIP tuner or if this is already integrated in a set with a digital recorder, then plug the antenna into the antenna input of the PIP tuner and connect the PIP tuner output with the ANT-TV socket (Tuner 1). See illustration on page 7.

Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 46 and 47.

If a Digital Satellite Tuner 1 has been retrofitted, connect your satellite antenna system to the ANT-SAT socket.

If a Digital Satellite Tuner 2 has been retrofitted, connect one antenna cable each, for example from the antenna switch or from the twin LNC, to both SAT sockets.

When laying the cable, use the cable clips affixed beneath the TV set. Replace the connection cover on the TV set.

Handling the fabric hose

Use the fabric hose included to lay the mains cables, antenna cables or cables from other electronic components systematically; then lead the hose with the cables to the connection boxes. This provides you with an elegant solution when laying cables.

The diameter of the fabric hose increases when you push it together lengthwise (see illustration). This makes it easier for you to push through cables with plugs.

Using the conditional access module

In order to be able to receive encrypted digital stations, the conditional access module (CA module (1) and the smart card (1 both have to be inserted into the corresponding slot of your TV set. You can find the slot common interface (CI- Slot) on the back of your TV set, see the illustration on pages 6/7.

1.Make sure the TV set is switched off with the mains switch on the set.

2.First push the smart card into the CA module as far as it will go. Insert it so that the side with the golden

contact chip faces the side of the module printed with the supplier‘s brand logo.

Printed arrows indicate how to insert the card. Also follow the installation instructions included with the smart card.

3.Slide the CA module carefully into the slot with the contact side facing the front. The logo on the CA

module should be visible.

Eject button

 

Make sure the module is not twisted in the process.

 

 

Do not use force.

 

 

When the module locks, the eject button is pressed

CA module

Slot-CI

outwards.

 

 

(1

The CA module and the smart card are not included

 

 

in the scope of delivery for this set; you can usually

 

obtain them at your specialist dealer.

Switching on

Press the mains switch (for Spheros R 37, the set switches on immediately, the green indicator lamp lights up).

For Spheros R 26/32:

The red indicator on the set now lights up (standby mode).

Switch on the set using the switch integrated in the indica- tor. The green indicator on the set now lights up (for further operating options see page 14).

Downloaded From TV-Manual.com Manuals

- 12

Image 12
Contents Operating Instructions Contents Remote control TV functions Or timer recording Station down Station up Menu left Control units Spheros R 26 and RTo standby Or radio mode Control unit Spheros RCommon Interface CI-SlotConnections to rear panel Spheros R Headphone connectionConnections to rear panel Spheros R 32 and R Welcome Cleaning DisposalPacking and box SetFor your safety Air circulation can Cause fires. ThereforeFirst installation Remote controlConnection Using the conditional access module Switching onHandling the fabric hose Automatic programming Station sortingSwitching on/off Directing DVB-T antennaSelect a TV channel Daily operation Changing stationsBasics about the menu operation Example of the menu operationLoudness KeyOKSelect Settings For the info systemThis is how to select the index item For the indexControl like on a mobile phone keypad Use To go to the previous/next letterSetting the sound Picture settingsDirect control on TV set How the coloured keys work in TV mode Operating modes TVShow status display Calling the indexCall timer overview Call additional functionsSelect picture format Move picture up/downUnder Settings you will find the following functions DVB subtitlesInstalling new DVB software Removing the CA moduleInserting a new CA module Calling the CA module menuImage+ demo mode Image+Image+ menu Call the menu Additional functionsOperating modes PIP Picture in picture PIPSetting the PIP type Switch to small PIPFunctions in the PIP menu Position of the PIP pictureUsing the EPG EPG Switch EPG on/offMark this by using OK Operating modes EPGSwitch on TV when marked Programming recording for recordersEPG menu Selecting providers and stationsOperating modes Teletext Analogue TeletextSelection with the coloured keys Other page selection optionsProgramme timer recordings Teletext menuDigital teletext operation only for MHEG-5 device versions Menu Display teletext menuOperating modes Radio RadioRadio menu EPG Programme guideLogin and connect equipment Connecting video/DVD recordersOperating additional equipment Video playback Calling AV input via the station listCalling AV inputs in the AV selection Now you will see the playback from the connected AV deviceAssignment of digital audio inputs and outputs Audio input Audio DigitalAudio output Audio Digital OUT Component Video Six pin Cinch Cubic plug cableConnecting other audio amplifiers or active speakers Sound menu using the button, select Sound via and then TVSetting colour standard Hdmi DVI connectionVGA/XGA connection Set geometryComponent video connection Sound from PC or Set Top BoxSetting the remote control using code entry Operating other Loewe devices with the RC3 remote controlUsing the RC3 remote control to operate a VCR Functions for Loewe VCR VV 8106, 8136Setting the range of rotation basic adjustment Setting the position of the TV set when switched offRotating the TV set for Spheros R 32/37 Problem Possible cause Remedy What to do, ifWired Digital Link Plus does not functionReplace the Euro-AV cable That they fall between 1Technical data General dataType Spheros R Electrical data ConnectionsAccessories Retrofitting options Device version / Equipment Item no PIP tuner Digital65437xxx MHEG-5 Service Somara S.ACodelist RC3 / Lista de códigos RC3 LoeweVCR SAT /STB DMT Cable Box STB UEC

Spheros R 32, Spheros R 37, Spheros R 26 specifications

Loewe Spheros R 26, Spheros R 32, and Spheros R 37 are innovative audio solutions designed to meet the needs of both residential and commercial environments. These devices exemplify a perfect blend of cutting-edge technology, sleek aesthetics, and superior functionality, making them highly sought after for enhancing audio experiences.

The Loewe Spheros R 26 is a compact speaker that delivers impressive sound quality despite its small form. One of its standout features is its high-efficiency driver, which allows for crystal-clear audio reproduction across a wide frequency range. The speaker is equipped with Bluetooth capabilities, facilitating seamless wireless connectivity with a variety of devices, such as smartphones, tablets, and computers. Additionally, the Spheros R 26 features an integrated amplifier, eliminating the need for external components, making it a versatile choice for any setup.

Moving up in size, the Spheros R 32 offers added power and depth. This model includes advanced audio technologies, such as a sophisticated DSP (Digital Signal Processing), which optimizes sound performance according to the environment. With a focus on delivering dynamic bass and clear highs, the Spheros R 32 enhances the listening experience for music enthusiasts and casual listeners alike. Its elegant design makes it a stylish addition to any room, while its robust connectivity options, including Wi-Fi and Ethernet, provide flexibility and convenience for streaming purposes.

The Spheros R 37 stands at the pinnacle of the series, designed for audiophiles who demand the utmost in sound fidelity. Featuring an expansive soundstage, the Spheros R 37 integrates multiple drivers and a passive radiator system, allowing for deep bass and a rich midrange, which is essential for reproducing complex musical compositions. The inclusion of advanced features such as multi-room audio capabilities allows users to synchronize music playback across different areas of their home or venue. Furthermore, the Spheros R 37 supports high-resolution audio formats, ensuring that every detail is captured and presented accurately.

In summary, the Loewe Spheros R 26, R 32, and R 37 represent a comprehensive range of audio solutions that cater to different needs and preferences. With features like Bluetooth connectivity, advanced DSP technology, and multi-room capabilities, these speakers are designed to deliver exceptional sound quality and convenience. Whether for personal enjoyment or professional use, the Spheros series combines innovation with aesthetic appeal, making them a valuable addition to any audio setup.