Eddie Bauer 4358-3432E, Enspira manual Choosing Latch or Vehicle Belts, Knowing Your Vehicle Belts

Page 13

4358-3432E Enspira 5pt 8/6/07 4:46 PM Page 25

Choosing LATCH or Vehicle Belts

The LATCH System

Knowing Your Vehicle Belts

Not all vehicle belts will work with this child restraint. You must determine if your vehicles belts are compatible with

Anchor bars

LATCH means Lower

Anchors and Tethers for CHildren. Not all vehicles manufactured before September 2002 were equipped with LATCH.

The LATCH system allows a child restraint to be secured in the vehicle without using the vehicle belt system and can ONLY be used in vehicles that have the anchor bars installed.

this child restraint. If you will use the LATCH system, refer to the LATCH section.

ELR - Emergency Locking Retractor Belts Definition:These belts only lock in a sudden stop or crash. To see if you have this type of belt, pull on the lap belt, let it return part way, then pull on it again. If it moves freely, it is an ELR belt and the child restraint could work loose during normal driving. Refer to your vehicle owner’s manual.

Some ELR belts will convert to Automatic Locking Retractor (ALR) belts if you pull the belt all the way out. Refer to your vehicle owner’s manual.

ELR shoulder belts either require a locking clip or cannot be used with any child restraint. Note: You may use an ELR lap and shoulder belt when using this seat as belt- positioning booster; no locking clip is required.

Check your vehicle owner’s manual to see which seating positions may be equipped with the LATCH system.

Vehicle Belts

If LATCH is not an option, you will use your vehicle’s belts. There are some vehicle belts that will not work with a child restraint or will require special attention. See next page for specific instructions.

22

ELR lap-only belts must be replaced with a manual belt; contact your vehicle dealer. A locking clip will not correct this problem.

Automatic/Passive vehicle seat belts

An automatic (passive) 2-point belt has no lap belt.You must install a lap belt to secure a child restraint.You may also need to install an extra lap belt for an automatic 3- point belt. Refer to the vehicle owner’s manual. A locking clip will not correct this problem.

Vehicle belt too short

Contact your vehicle dealer for a seat belt extender.

Belts in center of the door or side panel (A) or middle of the vehicle seat cushion (B).

A

 

B

You must move the child

 

restraint to another seating

 

 

 

 

 

 

location.A locking clip will not

 

 

 

fix this problem.

 

 

 

See “Locking Clip” section.

 

 

 

 

continued on next page.

 

 

 

23

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Deluxe Convertible Car Seat Before You Begin Table of Contents4358-3432E Enspira 5pt 8/6/07 446 PM Registration and Recall Information Aircraft InstallationGeneral and Warm Weather Use Dorel Juvenile Group, Inc PO Box 2609, Columbus,Understanding Your Vehicle Seat Buckles Air Bag Seat Bight Where seat cushions meetAnchor Bracket Latch AnchorsShoulder Belt Body Pillow Guide Child Restraint PartsChoosing Restraint and Position Install Cup Holder onPreparing Child Restraint to Fit Your Child Select models Pull padCheck Harness Height For Models With a Body PillowTo change harness For Models Without a Body PillowLocation To change harness location Harness Covers on select modelsShell match slots Place child in childSecuring Your Child in the Child Restraint Belt-Positioning Booster Must be fully- upright Knowing Your Vehicle Belts Choosing Latch or Vehicle BeltsAutomatic/Passive vehicle seat belts Vehicle belt too short Manual Belts Locking ClipRear-Facing Use Rear-facing belt slot Lap/shoulder beltFront of the buckle Strap and out oppositeRear-Facing Installation with Latch Install Latch Belt Push Latch hook Rear-Facing Installation with Latch Install in VehicleBelt path slot Pull other end of LatchChild restraint. See Forward-Facing UseChild Restraint section Cm, Over 1 year of ageForward-Facing Installation with Vehicle Belts Forward-Facing InstallationForward Top anchorage strap Shown installedBuckles, place your As describedLatch belts do not Child restraintLoosen, your child Restraint should beTo Adjust Top Adjusting the Top Anchorage StrapBelt-Positioning Booster Use Anchorage StrapFrom bottom of seat, locate buckle’s metal clip Removal of HarnessSlots from the front Through one Belt-Positioning Booster InstallationBelt guide.The belt Childs neck and lieOnto the splitter plate Reinstall HarnessRemoving Seat Pad for Cleaning Remove from plastic TroubleshootingLimitation of Damages WarrantyFax orders to Replacement Parts Order Form

Enspira, 4358-3432E specifications

Eddie Bauer 4358-3432E Enspira is a standout in the domain of premium outdoor gear, capturing the essence of quality and functionality. Designed for adventurers and outdoor enthusiasts, this innovative product embodies a seamless blend of comfort, durability, and advanced technology.

One of the main features of the Eddie Bauer Enspira is its exceptional insulation capabilities. Utilizing advanced synthetic materials, it ensures warmth without adding unnecessary bulk. This lightweight insulation is specifically engineered to retain heat even in wet conditions, making it an ideal choice for unpredictable weather patterns that outdoor activities often bring.

In addition to its insulation, the Enspira is equipped with a water-resistant exterior that provides protection against rain and snow. The fabric is designed to repel moisture while allowing breathability, preventing overheating during vigorous activities. This combination ensures that wearers stay dry and comfortable, whether they're hiking through a drizzle or navigating snowy trails.

The Enspira also prioritizes mobility. Its ergonomic design allows for a full range of motion, which is crucial for dynamic activities such as climbing or skiing. Strategic stretch panels enhance flexibility, making it easy to layer without feeling constricted. Furthermore, the articulated sleeves and adjustable cuffs offer a tailored fit that keeps out cold air while ensuring ease of movement.

An important aspect of this product is its sustainability. Eddie Bauer is committed to eco-friendly practices, and the Enspira reflects this ethos. The materials used are responsibly sourced, demonstrating the brand's dedication to reducing its environmental footprint. This commitment to sustainability is increasingly important for consumers who prioritize responsible consumption alongside performance.

Additional features include multiple pockets for secure storage of essentials, such as keys or snacks, and a hood that adds an extra layer of protection against the elements. The design is not only functional but also aesthetically appealing, making it suitable for both outdoor excursions and casual wear.

With Eddie Bauer 4358-3432E Enspira, users experience a high level of craftsmanship and attention to detail. Every feature is thoughtfully designed to enhance the outdoor experience, making it a reliable companion for any adventure. Whether you're a seasoned trekker or a weekend explorer, this gear is an essential addition to your outdoor wardrobe.
Top Page Image Contents