12COREBUILDER 2500 INTELLIGENT SWITCHING SOFTWARE VERSION 8.1.2
Table 2 outlines the configuration restrictions.
Table 2 Physical Configuration Limitations
|
| Chassis with Revision 8.x | Chassis with Revision 7.x | Chassis with Revision 6.x |
System Configuration | Motherboard | Motherboard | Motherboard | |
|
|
|
|
|
■ | 2 old | Configuration is not | Configuration is not | Configuration is not |
| modules (3C201400) | supported* | supported* | supported* |
■ 1 FDDI (MMF or SMF) | Draws 15 amps | Draws 14.3 amps | Draws 14.45 amps | |
| module |
|
|
|
■ | 1 ATM module |
|
|
|
|
|
|
|
|
■ | 2 old | Configuration is not | Supported configuration | Supported configuration |
| modules (3C201400) | supported* |
|
|
■ | 1 | Draws 14.4 amps |
|
|
■1 ATM module
■ | 2 old | Configuration is not | Supported configuration | Configuration is not |
| modules (3C201400) | supported* |
| supported* |
■ | 1 | Draws 14.6 amps |
| Draws 14.05 amps |
■1 ATM module
■ | 2 old | Configuration is not | Configuration is not | Configuration is not |
| modules (3C201400) | supported* | supported* | supported* |
■ | 1 | Draws 15.2 amps | Draws 14.5 amps | Draws 14.65 amps |
■1 ATM module
*This system configuration would be supported if you replace both of the older