Atlas 520099 manual Long Address, High Byte, Long Address, Low Byte, Advanced Consist Address

Decoder for Atlas N Scale H15/16-44 Locomotives				8
CV	Reg.	Description	Range	Default
				Value**
8	8	Manufacturers Identification:	-	127
		This value is the manufacturer ID of the decoder,
		(Atlas=127). Writing the decimal number “33”
		to this Register will reset all CVs in the
		decoder to their factory-default values
		EXCEPT FOR the speed step settings in CV67
		to CV94.
17	-	Long Address, High Byte	192-	0
		The long (also called extended) address, if used,	231
		is contained in CV17 and CV18.
18	-	Long Address, Low Byte	0-255	0
19	-	Advanced Consist Address	1-99	0
		The Advanced Consist address, if used, is
		stored in CV19.
29	Decoder Configuration, Byte 1:		0-55	6
	Several decoder properties are set with CV29. Changes
	are easiest if done in binary mode, but can also be done
	by adding together the decimal values (shown in
	parenthesis) for all the desired features and writing the
	total into CV29. (For an example, see the section
	Converting Binary Values of Individual Bits within a
	Configuration Variable into the Equivalent Decimal Value
	of the Entire CV.)
	The definitions for the individual bits of CV29 are given
	below.
	Bit 0	Locomotive direction:	0,1	0
		This bit sets the direction that the locomotive will		(1)
		move when told to move forward in digital (DCC)
		mode.
		0 = locomotive’s direction is normal
		1 = locomotive’s direction is reversed

Atlas Model Railroad Co., Inc.