Graco 309419D important safety instructions Air Caps, Round Pattern Kits, PROt Xs Gun

Air Caps

FAN PATTERN AIR CAPS (All Models)

Air Cap		Pattern Length
Part	Pattern	with Wide Pattern Kit*
No.	Shape	[without Wide Pattern Kit*]	Recommended Fluids & Production Rates
24A438	Round End	381–432 mm (15–17 in.)	Light to medium viscosity.
		[330–381 mm (13–15 in.)]	Up to 600 cc/min (20 oz/min).
24A279	Round End	356–406 mm (14–16 in.)	Medium to high viscosity.
		[330–381 mm (13–15 in.)]	Up to 600 cc/min (20 oz/min).
24A376{	Tapered	432–483 mm (17–19 in.)	Light to medium viscosity.
	End	[330–381 mm (13–15 in.)]	Up to 600 cc/min (20 oz/min).
24A274	Tapered	305–356 mm (12–14 in.)	Light to medium viscosity.
	End	[330–381 mm (13–15 in.)]	Up to 600 cc/min (20 oz/min).
24A439	Tapered	279–330 mm (11–13 in.)	For use with 2.0 mm nozzles.
	End	[254–305 mm (10–12 in.)]	Medium to high viscosity and high solids.
			Up to 600 cc/min (20 oz/min).
24A275	Tapered	356–406 mm (14 –16 in.)	Light to medium viscosity and high solids.
	End	[297–348 mm (12–14 in.)]	Aerospace coatings.
			Up to 750 cc/min (25 oz/min).

*Wide Pattern Kit – Part No. 24A431 { Also available in the following colors:

24A276 – blue

24A277 – red

24A278 – green

NOTE: All air cap pattern shapes and lengths were measured under the following conditions:

Distance to Target: 254 mm (10 in.)

Inlet Air Pressure: 3.4 bar (34 kPa, 50 psi)

Fan air: adjusted for maximum width with manual gun.

Fluid Flow Rate: 300 cc/min. (10 oz./min.)

Pattern shape and length are material–dependent.

ROUND PATTERN KITS

Light to Medium Viscosity. Light to Medium Production.

PROt Xs Gun

Kit Part No.

(Manual No.)

Pattern

Diameter

245217

(309447)

102 to 152 mm

(4 to 6 in.)

245219

(309447)

203 to 254 mm

(8 to 10 in.)

277851

(313223)

Adjustable

2 309419