DC –In Jack
[
] Power Button
Stand
Sliding Prevention Holder
Service terminal
Kensington lock
Connect the power adapter to this jack.
Connect the power cord to the power terminal of the power adapter.
Turns the product on or off.
Hold down the power button at the right of the product for about 2 seconds.
You can use the product in a vertical or horizontal direction by using the rotating stand.
Supports the product so that it stays firmly in place on slippery surfaces.
This is a terminal for servicing the product only. Do not operate it arbitrarily.
The Kensington lock is a device used to physically secure the system when using it in a public place. (The locking device has to be purchased separately.)
Features Components | Front | Back | Side |
Side
The product color and shape may vary depending on the model.
Speaker | You can listen to sound without connecting an additional speaker. |
You can listen to sound by connecting headphones or earphones to the product.
Headphone connection jack
MEMORY CARD | Allows you to insert an optional memory card. (Only applicable for SD/MS card) |
Connect a PC or an external device using a USB cable.
Up stream terminal Connect your Digital Photo Frame to a PC's USB terminal