TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the service center.
Troubles | Remedies |
No video | Check the AC adapter and video cable |
| between the camera and a monitor |
The image on the screen is dark | Check the brightness control on the |
| monitor |
The image on the screen is dim | Check if the lens is stained. If dirty, |
| clean it with soft and clean cloth |
The camera is not working properly, and | Check if you have connected the |
the surface of the camera case is hot | provided AC adapter |
The contrast on the screen is too weak | Adjust the contrast feature of the |
| monitor. If the camera is exposed under |
| too strong light, change the position |
The image on the screen flickers | Does the camera face to directly to the |
| sunlight or fluorescent light? Change the |
| camera position |
Picture rolls and jumps, scrambled | Improper |
picture | monitor |
Picture smaller than screen | House current may be too low |
SPECIFICATIONS
• | Image sensor | 1/3” Sony Super HAD CCD, 811H x 508V |
• | Effective pixels | 768H x 494V |
• | Scanning system | 525 lines, 2:1 interlace |
• | Horizontal resolution | 560 TV lines |
• | Shutter speed | Auto, Manual (1/60 to 1/120,000 sec) |
• | Sync. System | Internal |
• | S/N ratio | more than 50db (AGC off) |
• | Minimum illumination | 0.01 Lux @F1.2 |
• | Video output | Composite |
• | AGC | Auto |
• | Digital Noise Reduction | Auto |
• | White balance | Auto |
• | Lens | DC Auto Iris |
• | Current consumption | 650mA Max @DC15V |
• | Power supply | DC 15V, 1.5A |