Celestron 72212 specifications Basic maintenance, Using the Camera, Button, Monitor

7.Basic maintenance

Operating Environment: 41o to104 o F(5o to 40o C). 20%-85% relative humidity,non-condensing.

Care of your VistaPix

7 -1.Never immerse VistaPix into any fluid or liquid. Remove dust or stains with a soft cloth dampened with water or neutral detergent. Keep in a dry and cool dust-free environment when not in use.

7-2.Take the batteries out when VistaPix is not to be used over a long period.

7 -3. Avoid dropping the VistaPix. Do not disassemble VistaPix.

P.12

4.Using the Camera

Use this product under good lighting conditions, avoid facing light source directly. Remember to keep a distance of at least 49 feet (15 meters) away from the target when taking a photo. As you press the "Shutter/Set" button, hold the binocular very steady until you hear a "Beep" sound. If the binocular is unsteady, the camera will not focus well and blurred images will result.

4-1 Turn on the power by pressing button for 3 seconds and you will hear two beep sounds. The monitor will display picture number and resolution. Press again to power off.

4-2 Press Up-down button to zoom in and out. It can magnify the image

up to 32x as seen on the LCD display.

4-3 Press the Shutter button to take pictures. Shooting is completed when you hear a beep sound.

4-4 Press the Movie button and a beep sound will signal that recording has begun. The green power indicator light will blink while recording is in

progress. Press the Movie button again to stop recording.

Function

5					Button
					NO INDICATORS		ITEMS
DOWN/	Del	SET/OK		3	1	Power / menu
					2	Movie / delete
				2
/ UP		MODE		1	3	Shutter / OK
					4	Zoom in / up
4					5	Zoom out / down
				Monitor
			3	NO INDICATORS			ITEMS
					1	Number of Images Remaining
1			4		2	Image resolution
			5
						0.3MP,	2.0MP,	3.0MP
					3	Movie mode
					4	SD card mode
2			6		5	Auto shooting mode
			7		6	Battery level
					7	Memory gauge

P.5