Power Up, Battery Installation, Sleep Mode

Power Up

I. Open the battery chamber cover.

II.Insert batteries in correct polarity(+ and -)as shown on the inside of the battery chamber.

III. Close the battery chamber cover.

IV. Power turns ON after pressing the power button.

V. The camera is now ready to take pictures.

1.Power turns ON after pressing the power button.

2.To turn camera OFF press and Power button until the camera beeps and the LCD screen is blank.

3.To turn camera ON from the OFF mode, press Power button until

a beep is heard and the LCD screen turn on.

When the camera is ON while not being used for 60 seconds, it will automatically perform sleep mode to save battery power.

To re-activate the camera from sleep mode :

1.Press the Power button once.

2.The camera is ready to take the next picture.