Safety CHECK-OUT

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

1.Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

2.Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors.

3.Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

4.Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

5.Check the B+ voltage to see it is at the values specified.

6.Flexible Circuit Board Repairing

•Keep the temperature of the soldering iron around 270˚C during repairing.

•Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

•Be careful not to apply force on the conductor when soldering or unsoldering.

Unleaded solder

Boards requiring use of unleaded solder are printed with the lead- free mark (LF) indicating the solder contains no lead.

(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

•Unleaded solder melts at a temperature about 40° C higher than ordinary solder.

Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time.

Soldering irons using a temperature regulator should be set to about 350° C.

Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful!

•Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

•Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0OR DOTTED LINE WITH MARK 0ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS

LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0SUR LES

DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

CAUTION :

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

DSC-H5_L2

— 3 —

DSCH5B specifications

The Sony DSCH5B is a high-performance digital camera that combines advanced features and user-friendly technologies, making it a popular choice among photography enthusiasts. This compact camera is designed to deliver exceptional image quality, versatility, and a range of functionalities that cater to both novice and experienced photographers.

At the core of the DSCH5B is its powerful 8.1-megapixel sensor, which captures stunning, high-resolution images with remarkable clarity and detail. The camera features a 5x optical zoom lens that allows users to take great close-up shots without losing image quality. This lens is complemented by a built-in Super SteadyShot image stabilization system that significantly reduces blurriness caused by camera shake, ensuring clear and steady images even in low light conditions.

One of the standout features of the DSCH5B is its intelligent automated settings, including face detection and smile shutter technology. The face detection feature automatically adjusts the focus and exposure to ensure that individuals in the frame are captured perfectly. Smile shutter technology takes this a step further by automatically capturing images when it detects a smile, making it ideal for candid shots.

The camera also includes a variety of scene modes, including portrait, landscape, and macro, allowing users to easily select the optimal settings for different shooting environments. For those who want more control over their photography, the DSCH5B offers manual settings, allowing for precise adjustments to exposure, ISO, and shutter speed.

Another impressive characteristic is the 2.5-inch LCD screen, which provides bright and vivid images, making it easy to compose shots and review photos. The screen features anti-glare technology, ensuring visibility even in bright sunlight. Additionally, the camera supports video recording, enabling users to capture high-quality videos alongside still images.

The DSCH5B is powered by rechargeable lithium-ion batteries, providing extended usage without the need for frequent battery changes. It also includes a range of creative effects and filters, enhancing the photographic experience and allowing for unique artistic expression.

In conclusion, the Sony DSCH5B is a feature-rich digital camera that excels in both image quality and ease of use. With its combination of 8.1 megapixels, advanced zoom capabilities, intelligent features, and a user-friendly interface, it remains a compelling choice for anyone looking to explore the world of photography.