GETTING ACQUAINTED
To configure power save settings
•In the PLAY mode, the Auto Power Off trigger time is fixed at five minutes.
1.Align the power/function switch with 
.
2.Press MENU.
3.Rock the control button up or down to select “Power Save” and then rock the control button to the right.
4.Rock the control button up or down to select the item whose settings you want to change, and then rock the control button to the right.
•To make auto power off settings, select “Auto Power Off”.
•To make sleep settings, select “Sleep”.
5.On the screen that appears, rock the control button up or down to make the setting you want, and then click the control button to apply it.
Auto power off settings: “2 min” “5 min”
Sleep settings: “Off” “30 sec” “1 min” “2 min”
•Sleep is disabled in the PLAY mode.
•Performing any button operation while the monitor is asleep immediately wakes it up and restores normal operation.
•The Auto Power Off setting is given priority if you have “2 min” set for both Sleep and Auto Power Off. This means that the camera turns off if you do not perform any operation for about two minutes in the REC mode.
•Auto Power Off is automatically disabled under any one of the following conditions.
—While a slideshow is playing
—When you are performing operations on a com- puter connected to the camera’s USB port
—While the AC adaptor is connected to the camera
6.Press MENU to exit the setting procedure.