En
TAKING A PICTURE
SETTING THE FLASH
A 4M | 28/45 | 4M | 28/45 |
AWB |
| AWB |
|
07 ⁄ 04 ⁄ | 03 02:40PM | 07 ⁄ 04 ⁄ | 03 02:40PM |
How to set the flash:
1. Press the ( ) button repeatedly until the desired indicator appears on the LCD.
Flash Mode | Description |
A Auto Flash | The camera judges if a flash is required. If the environment is too dark, the flash will |
| fire. |
A
Reduction The camera will automatically detect when the flash is needed and the flash will fire after a short delay.
Flash will fire in any lighting condition. | ||
|
| |
Flash off | The flash will not fire in this mode. Please use this mode if you want to capture the | |
| mood of the ambient lighting or to use the available light in places where flash | |
| photography is prohibited, such as museums. | |
| • | To prevent blurry pictures in low light situations, hold the camera steady when |
|
| pressing the Shutter button or mount the camera on a tripod. |
|
| |
Night Mode | A slow shutter speed is used in this mode to capture the lights in night scenes. | |
| • | To prevent blurry pictures in low light situations, hold |
|
| the camera steady when pressing the Shutter button |
|
| or mount the camera on a tripod. |
Note:
•The flash needs to recharge after it is fired. If the Shutter button is pressed while the flash is charging, the Flash Ready LED will blink. Please wait a few moments and press the Shutter button again to take a picture.
•Changing the Scene Selection will deactivate the flash setting. Please refer to page 22 for more information.
13