Concord Camera 3043 manual Setup menu and features, Setting the TV video signal format to PAL

TAKING PICTURES AND VIDEOS CLIPS

Setup menu and features

Beeper(		):
	ON			When Beeper is set on, a beep sound can be heard when the camera
				is powered on .
	OFF (Default)			No beep sound can be heard if Beeper is set at OFF mode.
Auto Power Off(			):
				When Auto Power Off is activated, after one minute of inactivity, the
	ON			LCD will automatically power off. Then the camera will automatically
				power off after being idled for around 3 minutes.
	OFF (Default)			The camera will not power off automatically in this setting.
Quick Review(		):
				When Quick View is set at ON mode, a preview of the picture/video just
	ON			taken as well as the options of ‘save’ and ‘delete’ will be shown on the
				LCD. This is very convineint for deciding save the picture or not.
	OFF (Default)			No preview of the picture/video just taken will be shown in this mode.
Self-Timer(		):
	10 sec (Default)			Setting the timer for a 10 seconds’ delay between the Shutter button is
				pressed and the moment when picture is actually taken.
	15 sec			Setting the timer for a 15 seconds’ delay.
	20 sec			Setting the timer for a 20 seconds’ delay.
Quality(		):
	Super Fine			Setting the picture quality to super fine. (Lower compression, bigger file
				size)
	Fine (Default)			Setting the picture quality to fine.
	Normal			Setting the picture quality to normal. (Smaller file size)
TV(	):
PAL				Setting the TV video signal format to PAL.
NTSC (Default)				Setting the TV video signal format to NTSC.

16