Problem | Cause(s) | Solution(s) |
Image is blurred | Camera is set to the slow shutter | • Set the camera to a mode other than |
| mode | Slow Shutter |
Subject is too dark | Insufficient light for recording | • Change the flash setting to Flash On. |
|
|
|
| Subject is too dark in comparison | • Adjust the exposure compensation to a |
| with surroundings | positive (+) setting. |
|
| • Use the spot exposure metering method |
|
| or the AE lock function to record. |
| White balance setting is inappropriate | • Reset the white balance mode. |
|
|
|
| Subject is too far away for flash to | • Remain within the range of 6.7 in. to 10.8 |
| reach | ft. (wide) or 7.5 ft. (telephoto) [17 cm to |
|
| 3.3 m (wide) or 2.3 m (telephoto)] from |
|
| the subject for flash photography. |
|
|
|
Subject is too bright | Subject is too close | • Remain within the range of 6.7 in. to 10.8 |
|
| ft. (wide) or 7.5 ft. (telephoto) [17 cm to |
|
| 3.3 m (wide) or 2.3 m (telephoto)] from |
|
| the subject for flash photography. |
Subject is too bright compared to surroundings
•Adjust the exposure compensation to a negative
•Use the spot exposure metering method or the AE lock function to record.
| Light is shining directly on or reflected | • Change the shooting angle. |
| onto camera from the subject |
|
| Flash mode is set to Flash On | • Set the flash to Auto Flash or Flash Off. |
|
|
|
Flash will not fire | Flash mode is set to Flash Off | • Set the flash to Auto Flash or Flash On. |
72