Connecting the camcorder to TV

Please follow the below instructions to connect your camcorder and TV via accessory AV cables for real-time display. You can display your video clips and still pictures on your TV, sharing them with your friends and family.

Connecting the camcorder to HDTV

HD TV hereby means the HDTV built-in component input ports, thus can perform HD high resolution quality while connected.

HD TV

Component Video in

		(red)
AV		(white)
AV
	<AV cable> (yellow)
HD OUT		(Do not plug in Yellow Cable)
		(Do not plug in Yellow Cable)
		<Component Video cable>

(green)

(blue) (red)

Component Audio in

1.Turn on your HD TV.

2.Turn on the Camcorder.

3.Plug one end of the component video cable into the (Component Video IN) port on the HDTV and the other end into the (HD OUT) port on the Camcorder.

4.Plug one end of the other AV cable into the (Component Audio IN) port on the HDTV and the other end into the (AV) port on the Camcorder. (Please do not plug in the yellow connector to the HDTV’s AV-IN.)

5.Press the input switch mode on the HDTV and select “Component Input”.

If you record an HD resolution clip while connected to your HD TV, the TV display video resolution will down size to WVGA resolution due to data bit rate, but the recorded file will remain HD with no change.

The HD TV will display your video clips in 1080i (60 fields) resolution mode although it is recorded in 1080P (30 frames) setting.