Yamaha RX-V457 owner manual Specifications

Page 83

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Front, Center, Surround, Surround back

20 Hz to 20 kHz, 0.06% THD, 8 Ω

85 W

•Maximum Power (EIAJ)

[Asia, Korea and General models]

1 kHz, 10% THD, 8 Ω

125 W

• Dynamic Power (IHF)

 

8/6/4/2 Ω

115/150/185/230 W

• DIN Standard Output Power [U.K. and Europe models]

1 kHz, 0.7% THD, 4 Ω

130 W

• IEC Output Power [U.K., Europe and Asia models]

1 kHz, 0.06% THD, 8 Ω

95 W

• Damping Factor (IHF)

 

20 Hz to 20 kHz, 8 Ω

120 or more

• Frequency Response

 

CD terminal to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

CD, etc. to Front L/R (20 Hz to 20 kHz, 40 W, 8 Ω)

..................................................................................

0.06% or less

• Signal to Noise Ratio (IHF-A Network)

 

CD (250 mV) to Front L/R, Effect Off

100 dB or more

• Residual Noise (IHF-A Network)

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

CD (5.1 kΩ terminated) to Front L/R

60 dB/45 dB or more

• Tone Control (Front L/R)

 

BASS Boost/Cut

±10 dB/60 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

• Phones Output

150 mV/100 Ω

• Input Sensitivity/Input.................................................................Impedance

200 mV/47 kΩ

CD, etc.

MULTI CH INPUT

200 mV/47 kΩ

• Output Level/Output.............................................................Impedance

200 mV/1.2 kΩ

REC OUT

SUBWOOFER

4 V/1.2 kΩ

VIDEO SECTION

• Video Signal Type

PAL/NTSC

• Signal to Noise Ratio

50 dB or more

• Frequency Response (MONITOR OUT)

 

Composite, S-video

5 Hz to 10 MHz, –3 dB

Component

5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

........................... 87.5 to 107.9 MHz

[Asia and General models]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Usable Sensitivity (IHF)

1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

76 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.2%/0.3%

• Stereo Separation (1 kHz)

42 dB

• Frequency Response

20 Hz to 15 kHz, +0.5, –2 dB

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.............................. 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Usable Sensitivity

300 µV/m

GENERAL

• Power Supply

 

 

[U.S.A. and Canada models]

AC 120 V, 60 Hz

[Australia model]

AC 240 V, 50 Hz

[Korea model]

AC 220 V, 60 Hz

[U.K. and Europe models]

.................................

AC 230 V, 50 Hz

[General model]

AC 110/120/220/230–240 V, 50/60 Hz

[Asia model]

AC 220/230–240 V, 50/60 Hz

• Power Consumption

 

 

[U.S.A. and Canada models]

350 W/440 VA

[Other models]

360 W

• Standby Power Consumption

......................................

0.1 W or less

• AC Outlets

 

 

[U.K. and Australia models]

1 (Total 100 W maximum)

[U.S.A. and Canada models]

2 (Total 100 W maximum)

[Europe, Asia and General models]

2 (Total 50 W maximum)

• Dimensions (W x H x D)

435 x 161 x 416 mm

 

 

(17-1/8” x 6-5/16” x 16-3/8”)

• Weight

11 kg (24 lbs 4 oz)

INFORMATION

ADDITIONAL

79

Page 82 Page 84
Image 83
Page 82 Page 84
Contents RX-V457 Important Safety Instructions FCC Information for US customers Serial No For Canadian CustomersContents Features Getting Started Supplied accessoriesInstalling batteries in the remote control Front panel Controls and FunctionsStraight Effect VolumeInput Mode Speakers A/BRemote control Handling the remote control Using the remote controlFront panel display Lights up when the input signal contains the LFE signal 96/24 indicatorLights up when a DTS 96/24 signal is input to this unit LFE indicatorVoltage Selector Rear panelAsia and General models only AC OutletsSpeaker placement Speaker SetupBanana plug connections Speaker connectionsSubwoofer jack Front terminalsCenter terminals Surround terminalsDigital jacks ConnectionsCable indications Analog jacksConnections for DVD playback Connecting video componentsConnecting to the Multi CH Input jacks Video AUX jacks on the front panel Connections for other video componentsConnections for audio components Connecting audio componentsOrient the AM loop antenna for the best reception Connecting the FM and AM antennasConnecting the AM loop antenna Memory back-up Connecting the AC power cordPress Straight Effect repeatedly to select 4 Ω MIN Speaker impedance settingTurning on the power Press STANDBY/ON to turn off the powerUsing the Basic Setup menu Basic SetupPress Enter to confirm your selection Press d to display SET/CANCELPress d to display the Speakers parameter Press j / i to select the number of speakers you connectedPerform the following steps after see To balance the speaker levelsBasic operations PlaybackSelect a sound field program if desired To listen with headphonesTo adjust the tone To mute the soundFront panel operation Selecting Multi CH InputPlaying video sources Background Off OFF Remote control operation Enjoying multi-channel softwareAuto Auto Decoders select with jEnjoying 2-channel software in surround Press Select on the remote control to select the decoderWhen you select the SUR. Standard program When you select the SUR. Enhanced or Movie Theater programNight listening modes This adjusts the level of compressionListening to high fidelity stereo sound Direct Stereo Virtual Cinema DSP Listening to unprocessed input signalsSelecting input modes Downmixing to 2 channelsPress u / d to display the following Information about the input signalDisplaying information about the input source Automatic tuning FM/AM TuningAutomatic and manual tuning Press FM/AM to select the FM band Presetting stationsManual tuning Automatically presetting FM stationsAutomatic preset tuning options Manually presetting stationsRepeat steps 1 to 5 to store other stations Selecting preset stationsShows the displayed station has been stored as C3 Press and hold PRESET/TUNING Edit for more than 3 seconds Exchanging preset stationsSelect preset station E1 See Selecting preset stationsStations stored at the two preset assignments are exchanged Press PRESET/TUNING Edit againFront panel functions XM Satellite Radio TuningWhat is XM Satellite Radio? XM Satellite Radio functionsBand Remote control functionsSrch Mode Activating XM Satellite RadioBasic XM Satellite Radio operations Selecting the XM Satellite Radio modeXM Satellite Radio search modes Switching XM informationAll Channel Search mode CAT SEA R CH Category Search modePres E T S E Arch Preset Search mode Direct Number Access modeDisplay changes as follows Setting XM Satellite Radio preset channelsMemory indicator flashes for about five seconds Group letter appears DeepCheck Antenna Status and error messagesRecording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Hall in Vienna For music sourcesAdvanced Operations Using the sleep timerSetting the sleep timer Canceling the sleep timerControl range is from +10 dB to -10 dB Manually adjusting speaker levelsPress j / i to adjust the speaker output level Press Enter when you have completed your adjustmentOption Menu SET MenuSound Menu Input MenuUsing SET Menu Speaker settings Aspeaker SET Low-frequency effect level Elfe Level Speaker level BSP LevelSpeaker distance CSP Distance Center graphic equalizer Dcenter GEQInput/output assignment AI/O Assign Audio settings Gaudio SETDimmer Dimmer Display settings Adisplay SETParameter initialization CPARAM. INI XM Radio antenna XM ANT Speaker B setting SP BXM Radio setting EXM Radio SET Press STANDBY/ON to confirm your selection Advanced Setup MenuAdvanced Setup menu is displayed in the front panel display Asia and General models only Tuner TU Advanced Setup menu itemsFactory presets Preset Speaker impedance SP IMPControlling other components Remote Control FeaturesControl area Controlling this unitTransmit indicator on the remote control flashes twice Setting remote control codesRemote Control Code Default Settings Press Code SET using a ballpoint pen or similar objectVCR Controlling other componentsEnter the code number 9991 or 9992 see the table below Switching library codesClearing set up remote control codes Clearing a setup remote control code for component controlElements of a sound field What is a sound field Changing parameter settingsEditing Sound Field Parameters Use PARAM. INI see Resetting parameters to the factory PresetsFor 2ch Stereo Direct Direct INIT.DLY Initial delaySound Field Parameter Descriptions DSP Level DSP levelFor DTS Neo6 Music Image Center image Dimension DimensionFor 6ch Stereo CT Width Center widthGeneral TroubleshootingOnly the speaker on 14-18 Tuner Remote controlPress STANDBY/ON to confirm your Resetting the Factory PresetsBe sure this unit is in standby mode Press Straight Effect to select the desired settingAudio formats GlossaryPCM Linear PCM Sound field programsAudio information LFE 0.1 channelVideo signal Video signal informationComponent video signal Composite video signalSpecifications List of Remote Control Codes VCR Cable TVSatellite Tuner DBSCD Recorder CD PlayerDVD Player DVD RecorderElectric SHOCK, do not Remove All rights reserved

RX-V457 specifications

The Yamaha RX-V457 is a versatile and powerful AV receiver that was crafted to enhance the home audio experience. Designed with both quality and functionality in mind, this receiver appeals to both audiophiles and casual listeners looking for an impressive sound system.

One of the standout features of the RX-V457 is its robust audio performance. It supports a 6.1-channel surround sound system, providing immersive audio quality that brings movies, music, and games to life. With a total output of 630 watts, users can expect dynamic sound that fills the room, whether it’s the subtle sound of a whisper or the booming action of a blockbuster movie.

This AV receiver also comes equipped with Yamaha’s Digital ToP-ART (Total Purity Audio Reproduction Technology). This technology minimizes signal interference, which results in clearer audio and better overall sound quality. Additionally, the RX-V457 employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) feature. This automatic calibration system analyzes the room’s acoustics and adjusts the receiver’s settings for optimal performance, ensuring that every listener experiences the best sound quality, regardless of where they are seated.

Connectivity options are plentiful with the RX-V457. It boasts a range of audio and video inputs, including multiple HDMI inputs, component video, and composite video connections. This extensive capability allows users to connect various devices such as DVD players, gaming consoles, and streaming devices seamlessly. Furthermore, the receiver supports both analog and digital audio signals, making it an adaptable choice for diverse audio sources.

In terms of user interface, the Yamaha RX-V457 is designed for ease of use. The straightforward remote control and on-screen display make navigating through options simple, allowing users to adjust settings or switch inputs without hassle.

The aesthetics of the RX-V457 is sleek and unobtrusive, fitting comfortably into a variety of home entertainment setups. The build quality is robust, ensuring longevity and reliability for years to come. Overall, the Yamaha RX-V457 delivers a balanced combination of advanced technology, user-friendly features, and high-fidelity sound, making it an excellent choice for anyone looking to elevate their audio experience at home.
Top Page Image Contents