Yamaha RX-V550 Displaying information about the input, source, information about the input signal

PLAYBACK

Notes

3 Press u / d to display the following

• When you play DTS-encoded CD/LDs with the input mode set				information about the input signal.
to AUTO:
– This unit automatically switches to the DTS decoding mode.					PRESET/CH
The unit remains in DTS mode (and the tindicator may
flash) for up to 30 seconds after playback of the DTS source is
complete. To manually release the DTS mode, press INPUT					SELECT
MODE to reselect AUTO.
– The DTS decoding mode may be released if search or skip
operations are performed for more than 30 seconds. To
prevent this, press INPUT MODE to select DTS.				(Format)	Signal format display. When the unit
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you					cannot detect a digital signal it
make a digital connection between this unit and the player.					automatically switches to analog input.
Displaying information about the input				in	Number of source channels in the input
					signal. For example, a multi-channel
source
					soundtrack with 3 front channels, 2
You can display the type, format and sampling frequency
					surround channels and LFE, is
of the current input signal.
					displayed as “3/2/LFE”.
1 Select the input source.				fs	Sampling frequency. When the unit is
					unable to detect the sampling
				rate	frequency “Unknown” appears.
CD	MD/CD-R	TUNER	SLEEP		Bit rate. When the unit is unable to
DVD	DTV/CBL	V-AUX	MULTI CH IN		detect the bit rate “Unknown” appears.
				flg	Flag data encoded with DTS or Dolby
VCR			AMP		Digital signals that cue this unit to

automatically switch decoders.

2Press AMP to select the AMP mode, then press STRAIGHT (EFFECT) so that “STRAIGHT” appears in the display.

STRAIGHT

AMP

then ENTER

EFFECT

OPERATION BASIC

STRAIGHT

English

33