Focus Adjustment, Zoom Lenses, Synchronization

CC3320 and CC4620 Cameras	Installation Instructions

	FOCUS ADJUSTMENT

Zoom Lenses

Set the lens focus to infinity and fully open the iris by covering the lens with a suitable neutral density (ND) filter. Zoom out to the widest field of vision and view a distant object. Adjust the back focus screw until the object is in focus. Next, zoom fully in and adjust the lens focus until the object is again focused. Repeat these steps until the full zoom range may be viewed with the minimum loss of focus.

SYNCHRONIZATION

Cameras that operate from AC power supplies are line-locked for a supply frequency of 50 Hz. If the supply frequency is unstable, then disable the line lock by setting the SYNC switch to Internal.

WARRANTY AND RETURN INFORMATION

Pelco will repair or replace, without charge, any camera proved defective in material or workmanship for a period of two years after the date of shipment.

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information:

1. Model and serial number

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Method of return on warranty shipments shall be the same or equal to the method by which the item was received by Pelco.

In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289- 9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair). Goods returned should be clearly identified with the assigned CA/RA number and freight should be prepaid. All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.

Ship freight prepaid to:

•Pelco, 300 West Pontiac Way, Clovis, CA 93612-5699, or

•Pelco c/o American Overseas Airfreight , 320 Beach Road, Burlingame, CA 94101 (if shipped outside the United States)

REVISION HISTORY
Manual #	Date	Comments
C1932M	8/99	Original version
	8/99	AC supply voltage changed from 12-30 VAC to 14-30 VAC
® Pelco and the Pelco logo are registered trademarks of Pelco			© Copyright 1999, Pelco. All rights reserved.
			Pelco Manual C1932M (8/99)

C1932M, CC4620 specifications

The Pelco CC4620 and C1932M are prominent surveillance cameras that exemplify cutting-edge technology in the realm of security and monitoring. Designed for both indoor and outdoor applications, these models are well-regarded for their performance, flexibility, and reliability.

Starting with the Pelco CC4620, this camera is known for its high-resolution imaging capabilities, providing crisp and clear video data. It features a 1/4-inch CCD sensor, which boasts enhanced light sensitivity, making it an excellent choice for low-light environments. The CC4620 is equipped with a built-in varifocal lens, allowing users to adjust the focal length from 3.5mm to 10mm, which offers versatility in various surveillance situations. This model supports a significant range of viewing angles, making it suitable for different types of installations, from narrow hallways to expansive outdoor spaces.

The C1932M, on the other hand, is notable for its robust design and comprehensive features. This camera includes a 1/3-inch CCD sensor, providing high-quality video resolution that ensures detailed monitoring. The C1932M is designed with a weather-resistant housing, making it ideal for outdoor applications subjected to varying environmental conditions. Its wide dynamic range technology allows it to perform effectively in scenes with high contrast, ensuring visibility in bright and dark areas simultaneously.

Both models support advanced video compression technologies, including H.264, which significantly reduces bandwidth usage while maintaining high image quality. This feature allows for efficient storage solutions and seamless transmission over networks. Furthermore, the integration with various Pelco software solutions enhances the user experience, offering intelligent video analytics and remote monitoring capabilities.

In terms of connectivity, both the CC4620 and C1932M are compatible with standard video outputs, facilitating easy integration into existing surveillance systems. They also support PoE (Power over Ethernet), simplifying installation by reducing the need for separate power cables.

Overall, the Pelco CC4620 and C1932M are exceptional choices for users seeking reliable and versatile security solutions. Their combination of high-quality imaging, robust build quality, and advanced technological features make them suitable for a wide array of applications, ensuring safety and security in both commercial and residential environments. These cameras reflect Pelco's commitment to innovation and reliability in video surveillance technology.