CM6800-32X6 Installation

CM6800-32X6 INSTALLATION

Step 1. Install the CM6800 and all components of your system.

Refer to the Quick Start illustrations for an overview of system connections.

Step 2. Power-up the system.

Video from camera 1 and the Time/Date Stamp appears on all system monitors.

0001 E CAM 1

0001 01-JAN-01 01:01:01

The time stamp advances in one-second increments. WAIT FIVE SECONDS.

Step 3. Initialize keyboards.

From each keyboard select a monitor:

1.Enter the number of the monitor you are viewing.

2.Press the MON key.

If the keyboard LED does not display the monitor number, repeat 1 and 2.

Step 4. Switch cameras and select monitors.

After initializing keyboards you can

•Select Monitors: Enter the monitor number, and then press the MON key.

•Switch Cameras: Press PREV or NEXT, or enter the camera number and then press the CAM key.

•Control Extended Coaxitron® Protocol Receivers: Select a suitable camera and operate a PTZ function. Other receiver control protocols require programming changes.

Step 5. Program your system.

Configure the CM6800 to your specific application in programming mode or through the CM6800-MGR software. Refer to the CM6800-MGR Quick Start Guide for instructions on installing the CM6800-MGR.

The CM6800 is shipped from the factory with default programming settings. If the defaults are acceptable, the CM6800 can be operated without any user programming. However, you may want to program the following settings:

•Time and date

•Camera titles

•PTZ control via hard-wire data connections

•Communication ports – To connect remote keyboards to COM 4 (the alternate connection shown in Figure 1), change the Port 4 settings.

Access programming mode:

If you have not already done so, select the monitor. If the Camera menu appears

on the KBD960/KBR960 LCD display, press to exit.

1.Press the PGM key (or select PGM on the KBD960/KBR960). The Password screen appears.

PELCO VIDEO SWITCHER

MODEL CM6800

PASSWORD TO MAIN MENU

**********

SCRATCHPAD SEQUENCE

MACRO STATUS VIEW

RETURN

NOTE: On the KBD960/KBR960 you must first select and DEF . Then

enter the Define PIN (Default: 1234), and select MENU .

2. Enter the default password: 2899100. The Main Menu appears.

Figure 2. Connecting Multiple M Devices

Any single M device can be connected to Port 3 using a straight cable. If multiple devices are needed, connect as illustrated below.

010101	ALM2064
	OUT IN
2
RS-485		USE KBD960
RS-485		COM 1
3
4
5	REL2064	KBD960
	OUT IN

COM 3 DEFAULTS:

M, RS-485, 19200 baud, no parity, 8 data bits, 1 stop bit

Device Settings:

Each M device connected to the CM6800 must have a unique local address. For detailed instructions on device settings, refer to the appropriate device manual.

ALM2064 and REL2064 DIP Switch Settings:

(Note: DIP switches are located behind the front panel cover.)

1.Set SW2, DIP switches 1-8 to the appropriate local address positions.

2.Cycle power.

KBD960 Settings:

1.Set DIP switch 2 to the ON position.

2.Enter Setup Mode.

3.Select the baud rate and set the local address.

4.Return DIP switch 2 to the OFF position.

5.Press the EXIT icon on the keyboard LCD screen.

CM6800-32X6 specifications

The Pelco CM6800-32X6 is an advanced matrix switcher designed for video surveillance applications, providing users with exceptional control and flexibility in monitoring high-resolution cameras. This versatile device serves as a central command hub, allowing operators to manage multiple video sources seamlessly.

One of the standout features of the CM6800-32X6 is its support for up to 32 inputs and 6 outputs, making it ideal for large-scale surveillance setups. This capability ensures that operators can monitor various camera feeds simultaneously, enhancing situational awareness. Additionally, the matrix switcher supports a variety of video formats, ensuring compatibility with different camera systems.

The CM6800-32X6 utilizes advanced digital technology to deliver superior image quality. It supports high-resolution video formats, enabling operators to capture detailed visuals crucial for effective monitoring and incident assessment. This is particularly important in environments where clarity is paramount, such as public safety facilities and critical infrastructure sites.

User-friendliness is another key characteristic of the Pelco CM6800-32X6. The device features an intuitive graphical user interface (GUI), which simplifies the process of selecting camera feeds and configuring system settings. Operators can easily switch between feeds, focus on specific areas of interest, and even set up predefined camera movements for quick access.

Additionally, the CM6800-32X6 offers robust security features, ensuring that video streams remain protected against unauthorized access. This is achieved through secure user authentication protocols, allowing administrators to manage user permissions and access levels effectively.

Integration capabilities are another highlight of the CM6800-32X6. The matrix switcher can be integrated with existing video management systems, enhancing the overall surveillance architecture. This flexibility allows users to customize their systems to meet specific operational requirements, ensuring they can adapt as their monitoring needs evolve.

In conclusion, the Pelco CM6800-32X6 matrix switcher stands out in the surveillance market due to its extensive input/output capabilities, support for high-resolution video, user-friendly design, enhanced security features, and seamless integration possibilities. Its robust characteristics make it an excellent choice for organizations seeking to enhance their surveillance capabilities while maintaining an efficient and effective monitoring solution.