Release Notes

IPIX IP Cameras Supported on Digital Sentry

Integral Digital Sentry® digital video management systems (DVMS) support certain IPIX® IP camera models. The camera models listed in this document can be used with Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s table for information about the hardware and software features validated for use on a Digital Sentry system. Any general limitations or special instructions are listed at the beginning of the document, and any model-specific information is listed after each table. For information about the general usage of each camera, refer to the camera manufacturer’s documentation.

To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer to the Pelco Web site at www.pelco.com.

IPIX CommandView™ Dome CV-D2000

Firmware	N/A

Supported Resolutions	1600 x 1200

Frames per Second (FPS)	1 to 20

Number of Quality Settings	10

Supported Codec	MJPEG

Supported Motion Detection	In-Camera

Pan/Tilt/Zoom (PTZ)	Yes (solid state)

IPIX CommandView Dome CV-D3000

Firmware	N/A

Supported Resolutions	2048 x 1536

FPS	1 to 12

Number of Quality Settings	10

Supported Codec	MJPEG

Supported Motion Detection	In-Camera

PTZ	Yes (solid state)

C1006RN (1/09)		Page 1 of 2