2 Set the mode dial to [Tv].
3 Select the desired shutter speed by moving the select switch.
4 When the shutter release button is depressed halfway down, the shutter speed and aperture value will be displayed in the viewfinder and on the LCD panel.
Memo
The bar underneath the shutter speed indi- cates that you can change the shutter speed setting.
SELECTING AN EXPOSURE MODE
NOTE Exposure Warning
If the subject is too bright or too dark, |
| |||||||||
the selected aperture value will blink in |
| |||||||||
the viewfinder and on the LCD panel as |
| |||||||||
warning as shown. When the subject is |
| |||||||||
too bright, choose a faster shutter |
|
|
|
|
|
|
| |||
|
|
|
| |||||||
speed. If it is too dark, choose a slower |
| |||||||||
shutter speed. When the shutter speed |
| |||||||||
indication stops blinking, you can take | STEP | |||||||||
the picture. If both selected shutter | ||||||||||
| ||||||||||
speed and aperture blink, it means that |
|
| UP | |||||||
| ||||||||||
the exposure is out of metering range, | ||||||||||
| ||||||||||
unable to obtain a correct exposure | ADVANCED | |||||||||
even if the shutter speed is adjusted. | ||||||||||
| ||||||||||
Select a darker subject if the subject is |
| |||||||||
too bright. Use a flash if it is too dark. | OPERATIONS | |||||||||
USING THE METERED MANUAL MODE | ||||||||||
| ||||||||||
The manual exposure mode is a convenient exposure mode |
| |||||||||
for taking pictures using the same shutter speed and aperture |
| |||||||||
setting combination, or taking creatively under or overexpo- |
| |||||||||
sured photographs. |
| |||||||||
1 Set the lens aperture ring to [A] while pressing the aperture
66 | 67 |