Film Loading
Film type reminder dial
Use the film type dial to show what type of film is in your camera. When you have pulled out the rewind knob to open
the back when loading the film,
turn the dial selector so that the type of film appears in the window. To check whether the camera is loaded, turn the film rewind knob clockwise. If it turns freely, the camera is not loaded.
Avoid direct sunlight when loading your film.
1.Open the back by pulling out the rewind knob until the back cover snaps open.
2.Place the film cassette into the cassette chamber, and push back the rewind knob. Draw out the film leader and insert it into the slot of the
3.Advance the film by alternately turning the rapid wind lever and releasing the shutter until both sprockets have properly engaged the film perforations. Close the back by pressing it firmly.
4.If the film is properly loaded, the rewind knob will turn
Setting ASA film speed
The ASA film speed rating of all 35mm films is given in the data sheet packed with each roll of film. The
higher the ASA number, the more sensitive the film.
Lift the outer ring of the shutter speed dial and rotate it until the ASA number of your film is opposite the red index mark.
Be sure to set your film speed on the shutter speed dial because the dial is connected to the exposure meter system.
Reproduced for Historical & Reference purposes by Paul M. Provencher - | 9 |
http://whitemetal.com |
|