VistaQuest sensor 505-D user manual Troubleshooting, Problem Cause Solution

Troubleshooting

Problem	Cause	Solution
Power does not turn camera	Batteries are inserted in the	Reload batteries in the correct
on.	wrong direction.	direction.
	Batteries are dead.	Replace or recharge batteries.
	The battery compartment door	Make sure the battery
	is open.	compartment door is securely
		closed.
The camera does not take	The flash is charging.	Wait for the flash to charge.
pictures.
	Memory is full.	Insert a new memory card.
	Memory card is not formatted	The card may be defective:
	correctly.	use a new card.
Image is not recorded when	The flash is charging.	Wait for the flash to charge.
the shutter button is pressed.
	Memory is full.	Insert a new memory card.
The flash does not fire.	Flash is set to OFF.	Set the flash to any mode
		except off.
The image is blurred or out of	The camera was moving when	Hold the camera steady when
focus.	the image was captured.	shooting a picture.
The image is not displayed on	A memory card with	This camera cannot display
the LCD monitor.	non-PICT images (recorded	non-PICT images.
	with another camera) is
	loaded.
Recorded images are not	The camera was turned	If the battery low indicator
saved in memory.	off/powered down before	appears on the LCD monitor,
	saving images to the	replace the battery
	memory.	immediately.

43