Technicolor - Thomson LDK 100 manual Files Menu Features, Install Menu Features

Page 46

Systems Menu

Files Menu Features

A user of the LDK 100 camera can have access to 15 different files. This number can be extended by using additional scene file smart cards. The Files menu is used to recall and store these files.

There are two types of file:

*scene files

*operator files.

A scene file contains values related to the picture performance. The operator file contains values related to the set-up of the camera (viewfinder, lens and installation parameters).

The appendix indicates the functions that are stored in the scene file and those functions that are stored in an operator file.

Scene files

Four scene files are stored in the camera itself (SCAM1,SCAM2, SCAM3 and SCAM4). Another four scene files can be stored on the smart card (SCARD1, SCARD2, SCARD3 and SCARD4).

A STANDARD scene file (preselected as either factory or customer defined) is stored in the camera.

Note

The standard customer scene file is stored via the Security menu, not the Files menu. The decision to use the factory defined file or the customer defined file as the standard file is also made in this menu.

The Files menu enables the scene files to be stored and recalled using the store and recall entries of the menu system.

If the message NOK is displayed then the old values are restored. If the camera is on-air when a scene file is recalled then the recalled values do not become active until the camera goes off air.

Operator files

The Files menu also allows the recall of the opererator file stored in the camera (OCAM1) or one of the two operator files (OCARD1 and OCARD2) stored on the smart card. These files contain information for setting up the non-video configuration of the camera.

A STANDARD operator files (factory or customer defined) is stored in the camera.

Note

The standard customer operator file is stored via

the Security menu, not the Files menu. The decision to use the factory defined file or the customer defined file as the standard file is also made in this menu.

Install Menu Features

Gain

The gain can be selected in five steps: -, 0, +, ++ and

+++.The actual value of the gain in dB can be assigned to these symbols. This is done in the Install menu.

The "-" can be set to -6dB or -3dB. The '0' is always 0dB.

The '+' can be set to 6, 9, 12 or 18dB . The '++' can be set to 9, 12, 18 or 24dB.

The "+++" can be set to: 30 or 36dB [FT] 30, 36 or 42dB [IT].

Disable camera

The disable camera function is a protection function which prevents unathorised interference with the camera and provides an additional level of security. Setting disable camera to ON is similar to using User level 0 to protect the settings of the camera.

Aspect Ratio

The aspect ratio function is only available with switchable cameras. Aspect ratio values of 16:9 or 4:3 can be selected. If the loc/ext value is set to Ext, the aspect ratio can be switched by an external signal connected to the Base Station.

6-6

Operator's Manual LDK 100 Camera Head

Operating the Menu System

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Operator’s Manual Declaration of Conformity Introduction Intended audience About this ManualPurpose of this manual Structure of this manualSection Introduction Digital Processing Film-like characteristicsTechnology SuperXPanderScene files Access controlSmart Card Operator filesFeatures Important Precautions FCC Class a StatementOperators Manual LDK 100 Camera Head Introduction Section Assembling the Units Transport Case Lens Inch Viewfinder Mounting the 1.5-inch viewfinder and microphone holderPositioning the 1.5-inch viewfinder Right eye adapterWide angle eyepiece Inch Viewfinder AccessoriesLeft eye adapter Microphone Tripod Adapter Plate Local Control Panel SuperXPanderShoulder Pad Rain and Off-use Cover Zoom Controls Top LightOperator’s Manual LDK 100 Camera Head Assembling the Units Section Configurations Basic Configurations OCPSection Location of Controls and Functions Security and Access Power SupplySmart card slot Headset Programme volume control Audio microphone connector frontAudio Black Stretch switch Video FunctionsGain selection switch Colour Temperature selector White BalColour Bars switch Bars Clean Scan buttonVTR Start button Vertical Shift switch V-ShiftStd File button Viewfinder Viewfinder Indicators Control Functions Lens Video Install Files Security Diagnostics ServiceSystem Menu Select switch System Menu Rotary controlPage Section Shooting Using the Camera Standard settings Smart-TouchColour Bar Gain selectionColour temperature selection Auto-White BalanceShooting Screens Clean ScanEVR Enhanced Vertical Resolution IT Exposure TimeSection Using the Menu System System Menu On/Off Rotary Control Selection button Finding your way Systems MenuEntering the Systems menu Leaving the Systems MenuUndoing changes Making changesMenu Structure Run Hours Security Menu for Owners AccessUser Levels PIN CodeFiles Menu Features Install Menu FeaturesAppendix Contents List of Abbreviations Abbreviation Meaning
Top Page Image Contents