Specifications, 18 En, Audio Section, General

Specifications

AUDIO SECTION

• Frequency Response
SA-CD	2 Hz to 50 kHz (–3 dB)
CD	2 Hz to 20 kHz
• Total Harmonic Distortion (1 kHz)
SA-CD, CD	0.002% or less
• Signal to Noise Ratio (IHF-A Network)	113 dB or more
• Dynamic Range
SA-CD	105 dB or more
CD	100 dB or more
• Output Level (1 kHz, 0 dB)	2.0 ± 0.3 V

LASER DIODE PROPERTIES

• Type
SA-CD	Semiconductor laser (AlGaInP)
CD	Semiconductor laser (AlGaAs)
• Wavelength
SA-CD	650 nm
CD	780 nm
• Output Power
SA-CD	5 mW (max)
CD	7 mW (max)

GENERAL

• Power Supply
[U.S.A. and Canada models]	.............................. AC 120 V, 60 Hz
[Asia and General models]
AC 110/120/220/230–240 V, 50/60 Hz
[China model]	AC 220 V, 50 Hz
[Korea model]	AC 220 V, 60 Hz
[Australia model]	AC 240 V, 50 Hz
[U.K. and Europe models]	AC 230 V, 50 Hz
• Power Consumption	30 W
• Off-state Power Consumption	0 W
• Dimensions (W x H x D)	435 x 137 x 440 mm
	(17-1/8” x 5-3/8” x 17-5/16”)
• Weight	15 kg (33 lbs. 1 oz.)

* Specifications are subject to change without notice.

Taking care of this unit

When you wipe this unit, do not use chemical solvents (ex. alcohol or thinner etc.); this might damage the finish. Use a clean, dry cloth. For heavy dirt, dampen a soft cloth in detergent diluted with the water, wring it out, and then clean this unit up with the cloth.

The screws on the side panels may loosen as wood expands and contracts. In this case, tighten the screws.