2)Attach the antenna
3)Connect a
4)Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet.
5)Verify the Power and Link LEDs are on at the front of the camera.
6)It is recommended that you configure the Internet Camera from a wired computer. If you would like to use the SecurView software, please refer to the User’s Guide on the CD with the camera for more information.
7)Insert the Utility
8)Follow the IPSetUp Setup Wizard instructions and then click “Next”.
9)Click “Close”.
10)Go to Start Æ Programs Æ TRENDnet Æ IPSetUp and click “IPSetUp”. Note that by default, the IP setting on the
11)Select the camera server and click “Change IP”.
12)Configure the desired IP address to be in the same subnet as your network, type in the Administrator ID and Password and click “Change”. By default, the Administrator ID and Password are both “admin”.
13)Click “OK” and wait 30 seconds.
14)Click “OK” on the next window to appear.
15)Double click the camera server to access the browser configuration.
16)Enter the User name and Password, and then click “OK”. By default, the User name and Password are both set to “admin”.
17)Right click and select “Install ActiveX Control”.
18)Click “Install”.
19)Click “Setup”, “Network” and then click “Wireless”.
20)Click “Site Survey”. Select your wireless network. If encryption is enabled, select proper Authentication type, enter the
21)Disconnect the
22)Verify the Power and Link LEDs are on.
23)Click “Live View”
Camera Installation Is Now Complete.
Note: For detailed information regarding the
User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Internet Camera Server with
Page 2