H1 IMPRINT MODE
Imprint text setting
FLASH | AF | DRIVE | FLASH | AF | DRIVE |
|
|
|
Use the front wheel to move the cursor
to the left until it is over the “X” character.
This will activate the “delete- key”
FLASH AF DRIVE
Use the front and rear wheel to find the Copyright sign. This is located low down on the list, so you will have to scroll down a few screens to find it. (11 times down with the rear wheel and 5 times to the right with the front wheel). Now press “Sel” button to select the © character.
Press the button over the “Sel.” caption (AF button) to erase the character to the
left of the cursor in the lower row. Keep pressing the “Sel.” button until the whole text is erased.
FLASH AF DRIVE
Find the space character left to the exclamation mark on the first row. Press “Sel.”.
The text string is erased.
FLASH AF DRIVE
Find the W character and press “Sel.”.
-2005 10-05
imprintH1 .modes -indd
ID:Document
FLASH | AF | DRIVE | FLASH | AF | DRIVE |
Continue in the same way with | Press the “Save” button to | The display after pressing |
the other characters until the | store the text in the camera | ”Save”. |
complete string is ready. Maxi- |
| Remember to make the cor- |
mum are 37 characters. |
| rect setting on the magazine to |
|
| record the text on film. See the |
|
| follwing section. |
www.hasselblad.com