EverFocus EDH5102 user manual Defect DET, CAM Title, Cvbs

Page 14

EDH5102 1080p Mini Box Camera

4.1.7System

Press the Enter / Confirm button to enter the submenu.

DEFECT DET

Press to select the DPC (Defective Pixel Correction) level of defect detector. Please notice; do not use this function without cover the lens. The camera will automatically correct pixel defects. Misoperation will cause the abnormal image.

CAM TITLE

Switch to On and then enter the submenu to set up a camera name displayed on the screen.

RS-485

Use the ￿ and ￿ buttons to select ID, BAUDRATE, PROTOCOL and ID DISPLAY. The default of protocol is EVF-1 (EverFocus).

DOUT SCALE: Digital Output Scale

Use the ￿ and ￿ buttons to select FULL or COMP. This function is used to select the value range of auto brightness control. The value range of FULL and COMP is as below:

FULL: 0-255

COMP: 16-255

DOUT FORMAT : Digital Output Format

DOUT FPS: Frames per Second

FREQ: Frequency

CVBS

There are 4 options including 1080p 30FPS NTSC, 1080p 25FPS PAL, 720p 60FPS NTSC and 720p 50FPS PAL. If you want to change the format and FPS, you should change the FREQ first. Select

11

Image 14
Contents EDH5102 Page Contents Packing List FeaturesIntroduction Cable Description Installation Installation and AdjustmentPage Brightness Configuration in the OSD MenuOSD Menu Mode LensSharpness ChromaOFFSET/B-OFFSET Mirror / FlipDAY&NIGHT PrivacyShading HlmaskMode Window Trans ResolutionSensitivity Cvbs Defect DETCAM Title Reset LanguageSpecifications Appendix OSD Menu StructureMode OFF*, BLC BLC OSD ON, OFF BLC POS-X Shading ON*, OFF Auto Mode Color DAY&NIGHT AGC ThrsDelay MarginFormat Reset PUSH, PushingDout Dout FPSEverFocus Electronics Corp