EverFocus EHD300N specifications Precautions

Page 1

EVERFOCUS

1/3” Color Rugged Dome Camera

Operation Instructions

Model No. EHD300N

Please read this manual first for correct installation and operation. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice.

PRECAUTIONS

1.Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers since the magnetic fields generate from above devices will distort the video images.

2.Never disassemble the camera nor put impurities in it. Disassembly or impurities may result in trouble or fire.

3.Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4.Keep the power cord away from water and liquid. Touching the wet power cord may result in electric shock.

5.Never install the camera in areas exposed to water, oil or gas. Water, oil or gas may result in failure, electric shock or fire.

Image 1
Contents Do not install the camera near electric or magnetic fields PrecautionsCleaning FeaturesPreface Installation Page Wire Connection Termination Board Micro Switch for Alarm trigger Lens fixing Screws 140 36060 Default setting is on DIP Switch Function¾IRIS Level Control For Vari-Focal Lens Model Simple Instructions for the Desiccant Pack 12VDC/24VAC SpecificationsStandard Accessories Content ListOptional Accessory USA L.A. Office USA N.Y. Office Europe Office Head OfficeChina Office Japan Office