INSTALLATION
This section covers simple steps and detail installation. Please follow instruction for preventing any unnecessary damage.
Simple Steps:
1.Cut a circle on the ceiling and mount the camera
2.Adjust lens, camera position
3.Adjust camera setting on Dip Switch
Detail Steps:
1. Cut a circle on the ceiling and mount the camera
a.Make a hole on the ceiling (110mm/4.33”φ) against the housing’s shape by using Drill Template in the package.
b.Mount camera into the hole that you just made.
c.Connect Power and Video - Please connect 12VDC or 24VAC. Wrong power connection will cause power failure and shortage.
d.Screw the bolts on both sides of housing by using a screwdriver until they are perfectly fit to the ceiling.
e.Place the cover back and clip it on the camera.
5