III.Lens Available
*Standard board lens f=3.6 mm, F=2.0 mm.
* Other available lens : | Lens f=2.5 mm, F=2.0 mm |
Lens f=4.3 mm, F=2.0 mm | |
Lens f=6.0 mm, F=2.0 mm | |
Lens f=8.0 mm, F=2.0 mm |
IV. Installation Instructions
1.Remove the plastic dome cover.
2.Loosen the two screws of the supporting bracket to remove the camera body.
3.Using four screws to fix the camera base on the ceiling.
4.Put the camera body back to the supporting bracket, the connector of the back panel should always be placed to camera’s left lower corner, in order to obtain the image of best quality. Tighten the 2 screws to fix the camera. Please refer to the back panel diagram shows as below:
6