EverFocus EBD430 Adjusting Camera Position, Camera Base Fixing Ring Vertically Adjust up and down

Page 13

C H A P T E R 2 I N S T A L L A T I O N

2.2 Adjusting Camera Position

1.Attach the fixing ring with the dome body to the camera base by turning it clockwise. Please do tighten it to camera base at this step, so that you can aim the camera.

2.Adjust the direction of the camera to get the direction of view you want.

3.Twist the fixing ring clockwise tightly to lock it to the camera base.

Camera Base

Fixing Ring

Vertically Adjust up and down

Horizontally Adjust 360o

4.Tighten fixing screws.

Fixing Screws

Image 13

Contents Operation Instructions 1/3” CCD 3-Axis Outdoor IR Dome Camera EBD430EverFocus Operation Instruction PrecautionsFederal Communication Commission Interference Statement Table of Contents 1.Product Overview 1.1 FeaturesChapter Camera Unit x Operation Manual x Installation Template Sticker x 1.2 Accessory Parts ListMounting kit includes 1.3 Specifications Dimension between holes center to center 1.4 Dimensions116.97mmW x 144.07mmH x 138.9mmD /4.6”W x5.7”H x 5.5”D C H A P T E R 1 P R O D U C T O V E R V I E W1.6 Related Products 1.5 Camera Component DescriptionCamera Base Fixing Ring Fixing Screws 3-Axis Rotation Gimbals Zoom Control Focus Control2.1 Wiring and Mounting 2.Installation2.1.1 Drill the Holes Camera Base Fixing Ring 2.1.2 MountingCamera Base Ceiling MountWall Mount Camera Base Fixing Ring Vertically Adjust up and down 2.2 Adjusting Camera PositionHorizontally Adjust 360o Fixing ScrewsThere are two rings for adjusting focus and zoom 2.3 Adjusting Zoom and Focus1. Adjust the outer ring to the right and left to adjust focus 2. Adjust the inner ring to the right and left to zoom in or zoom outEurope Office Head OfficeUSA L.A. Office China Office