EverFocus ED640 Installation, OSD Menu Controls and Video Test Point, Lens Adjustment

Page 5

Installation

Warning: To prevent electrical shock, turn off the electrical power before making electrical connections. OBSERVE POLARITY when connecting 12VDC power to the camera.

1.Select mounting location. Open cover using tool provided.

2.Place template and drill holes (5/8” minimum for wires, ~¼” for hollow wall anchors; ~3/32” pilot hole for screws alone). Insert wall anchors if used.

3.Mount camera to ceiling with 3 screws and adjust camera direction.

4.Replace dome cover on base (snaps on).

1

2.

3.

4.

OSD Menu Controls and Video Test Point

Press the Menu/Enter button to bring up the OSD menu. Navigate the menu with the direction keys. Select RETURN to move back to the previous level menu. When exiting the main menu, choose SAVE, NOT SAVE or RESET (factory defaults) as desired.

Use adapter cable supplied to connect test monitor to video test point.

Lens Adjustment

Use fingers or screwdriver to adjust field of view (zoom) and focus.

5

Image 5
Contents Try to avoid facing the camera toward the sun Do not install the camera near electric or magnetic fieldsCleaning Features Table of ContentsBox Contents Product OverviewNtsc SpecificationsDimensions OSD Menu Controls and Video Test Point InstallationLens Adjustment AUTO, 1/6050, FLK, 1/250, 1/500, 1/1000, 1/2000 Rev~63 ATW1015 Cover the lens then press enter key Process now021 255~1.0 028~63 028 176A California Office Corporate HeadquartersIndia Office China Office