EverFocus EQH5200 specifications White Balance Control, Day/Night, Anti-Flicker

4.1.6 Anti-Flicker

Selections are Auto, 50Hz and 60Hz. Camera will auto adjust the shutter to reduce the flicker caused by fluorescent light when manual lens is used.

4.2 White Balance Control

The screen color can be adjusted by using the White Balance function.

Please select one of the 5 modes below by moving the joystick UP or DOWN then press “Set” button to save the setting:

AWB

This mode can be used within the color temperature range from 2,500°K to 10,000°K.

One Push WB

Enable one push trigger for white balance mode. This holds the white balance at a specific color temperature until the next command trigger is given.

Manual

The manual adjustment mode enables a more precise adjustment. Set the suitable color temperature, and increase or decrease the red and blue color values at the same time while checking the color changes of the objects in view.

Return: Select “Return” to saves all settings in this menu and returns to the previous menu.

Indoor

Select this option when the color temperature is 4,000°K.

Outdoor

Select this option when the color temperature is 5,000~6,500°K.

Select “Return” to return to the previous menu.

4.3 Day/Night

These settings control the operation of the camera when the illumination level changes. Choices are Color at all times; B/W at all times; or color when illumination is bright, switching to B/W in low light.

Please select one of the 3 modes below by moving the joystick UP or DOWN then press “Set” button to save the setting:

AUTO: The picture switches to color in a normal (bright) environment and switches to B/W when the ambient illumination is low. The switching point is determined by the AGC level.

COLOR: The picture is always displayed in color, even at low light levels.

B/W: The picture is always displayed in B/W.

Select “Return” to return to the previous menu.

- 11 -