5. Preparing Your Camera
|
|
●Insert the thin end of the strap into the strap holder.
.
●Pass the other end of the strap through the loop.
●Pull the strap tightly.
●Turn the camera off.
●Insert 2 x AAA alkaline batteries or rechargeable
batteries. Please make sure the batteries are fully charged. If the batteries are low on power, change the batteries as soon as possible to maintain normal operation.
※If the battery power indicator only shows one black
block, the flash is automatically disabled: If lower than 1.8V (the level when the battery power indicator turns red) the camera will automatically turn off.
●Slide the battery cover open in the direction indicated by the arrow.
●Insert the batteries according to the indicators on the inner side of the cover.
17