DXG Technology DXG-538 manual Installing the wrist strap, Loading the Batteries

Getting started

2.1 Installing the wrist strap

●Put one end of the wrist strap through the mount.

●Put the other end of the wrist strap through the first end.

●Tighten.

2.2 Loading the Batteries

●Be sure that the camera is in the “off” position. (Please refer to page 12)

●Before using, please insert two AAA-size alkaline batteries or rechargeable batteries correctly according to their indicated polarity. Please check the charge of the batteries. Replace the batteries if their charge is insufficient, so as to ensure that the camera functions normally.

※When using your digital camera, if the battery charge is weaker than 2.3V（one mark on the battery level icon), you will not be able to operate the flash; if the battery charge is weaker than 2.2V (red on the battery level icon), the camera will turn off automatically.

●Open the battery cover in the direction as indicated.

●Please load the batteries correctly according to the polarity icons as indicated on the inside of the battery cover.

10