FujiFilm ZOOMDATE115SR owner manual

Page 42

3

4

42

Aim the AF Frame at your subject and compose the picture.

1Point the remote controller toward the camera’s remote controller sensor, and then press the remote controller’s shutter release button.

2After the self-timer/remote controller lamp blinks for approx. 2 seconds, the shut- ter is released.

The remote control mode is not cancelled after shooting. It is automatically cancelled when the power is turned off.

Image 42

Contents Page Contents FeaturesPart Names →p.23 a →p.7 →p.19 → p.18 →p.18,28 →p.9 →p.23 →p.7 →p.6 →p.18,28 →p.29 →p.31 Liquid Crystal Display Viewfinder Preliminary Steps Attaching the StrapInserting the Battery Page Turning on Your Camera Checking Your Battery Setting the Date YEAR-MONTH-DAY/ HOUR-MINUTE Page Day blinks and the date change mode is entered Selecting the Date Mode Using Your Camera Loading the CameraPage Page Close the camera back Using Your Camera Page Press down the shutter release button halfway Page Page Using the AUTO-FOCUS Lock Check that the AF lamp green lights up Unloading the Film or Removing Film in MID-ROLL When rewinding is complete, the exposure counter will read Film cannot be reused once it has been rewound Selecting the Exposure Mode Advanced Techniques→ → → → → Effective flash range Film speed Wide angle Telephoto 38 mm No display Automatic flash at low brightness mode Dealing with red-eye Back light compensation flash mode Landscape mode Night portrait slow sync mode Using the SELF-TIMER Press the buttonPage Using the Remote Controller Press Button, until Appears on the LCDPage 11.5 ft Trouble Shooting During operation Problems Possible Causes SolutionsPrinted pictures Problems Possible Causes Solutions Common Sense Camera Care Specifications ViewfinderPower Supply Important Safety Notice Page FGS-204103-Ci-01