Yamaha CDC-697 Connecting an Amplifier, When the Line OUT analog terminals of this unit are used

Page 8

PREPARATIONS

Connecting an Amplifier

Never plug in this unit and other components until all connections are completed.

•Before making any connections, switch OFF the power to the unit and the amplifier or other components.

•Connections should be made to the correct input terminals of the amplifier or other components.

•If the placement of this unit causes noise in other equipment, such as a tuner, separate them from each other.

(General model)

LINE OUT

RL

OPTICAL

DIGITAL AUDIO OUT

1 Audio pin cable (included)

LINE OUT

RL

VOLTAGE SELECTOR

RS-232C

REMOTE CONTROL

 

IN

OUT

OPTICAL

DIGITAL AUDIO OUT

REMOTE CONTROL IN/OUT terminals

RS-232C terminal

2Optical cable

(not included)

L

 

R

 

 

OPTICAL

CD

DIGITAL IN

ANALOG IN

 

Amplifier

Choose one of the ways listed below to connect this unit to your amplifier.

■When the LINE OUT (analog) terminals of this unit are used (1)

•Be sure that the left (L) and right (R) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other components.

•Connect the LINE OUT terminals to the CD (or AUX) terminals of the amplifier. For additional details concerning these connections, refer to the operation instructions for the amplifier being used.

■When the DIGITAL AUDIO OUT (OPTICAL) terminal of this unit is used (2)

•Before using this terminal, remove the terminal cover by pulling it.

•Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical cable.

*Be sure to use a high quality optical fiber cable. Other cables might not function correctly.

•Be sure to attach the terminal cover when this terminal is not being used in order to protect the terminal from dust.

•Set the level of signals output into an amplifier to max by using the OUTPUT LEVEL –/+buttons.

For Custom Installer

■REMOTE CONTROL IN/OUT terminals

These terminals are used for custom installation system. When this unit is connected to the components for custom installation system, you can operate this unit with the system remote control.

Connect the REMOTE CONTROL IN terminal of this unit to the output terminal of the central controller for custom installation system.

By connecting the REMOTE CONTROL OUT terminal of this unit to the REMOTE CONTROL IN terminal of the other component, you can also operate it with the system remote control. In this way, up to 6 components can be connected in series.

■RS-232C terminal

This terminal dose not support normal external component connection. This is an expansion terminal for factory use only.

4En

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CDC-697 Important Safety Instructions FCC Information for US customers only For U.K. customersIiiv En Introduction FeaturesContents CD Preventive Cares To prevent a malfunction of this unitSupplied Accessories Remote Control TransmitterBattery replacement PreparationsConnecting an Amplifier When the Line OUT analog terminals of this unit are usedFor Custom Installer Remote Control IN/OUT terminals RS-232C terminalConnecting the power cable Voltage Selector Asia and General models onlyControls and Functions Front PanelSTANDBY/ON Synchro Dimmer TEXT/TIME Tape Display Display information at disc playbackChanging brightness of the display Selecting time displays and the text DataTurning On and Off the Power Basic OperationLoading and Playing Discs To turn on this unitTo stop playback completely Scanning DiscsTo stop playback temporarily Skipping Tracks SearchingTo go forward rapidly To go backward rapidlyRandom Sequence Play To cancel random-sequence playVarious Functions If necessary, select a desired disc Program PlayPress the Prog button to start programming To cancel a programmed sequence Display information during programmingTo stop program play To check program dataTo cancel the index search function Repeat PlayIndex Search REP S Single repeatFor optimum sound quality Adjusting the LevelTimer Play To cancel this function CD Synchronized RecordingTrack Programming for Recording Automatic Tape ProgrammingPress the Repeat button Stop the unit Select the discManual Tape Programming 2000828 You can select the same track againRandom Tape Programming 1300Display information during programming Follow steps 1 to 3 on Press the Random buttonPress the Peak button Stop the unit Select the 1DISC disc play modeAutomatic Peak Level Searching Troubleshooting Symptom Probable Cause RemedySpecifications Audio SectionLaser Diode Properties GeneralExample General model Page Page WH52590

CDC-697 specifications

The Yamaha CDC-697 is a high-performance compact disc changer designed to deliver exceptional audio quality and user convenience. This model is highly regarded among audiophiles and casual listeners alike, making it a popular choice for home audio setups.

One of the standout features of the CDC-697 is its capability to play up to five compact discs continuously. This feature allows users to enjoy uninterrupted music for hours, making it perfect for parties or long listening sessions. The capacity also enables easy access to a diverse range of music without the need to swap discs frequently.

The CDC-697 employs advanced digital signal processing technology to ensure accurate sound reproduction. This technology reduces distortion and enhances the clarity of audio, resulting in a rich, immersive listening experience. The built-in 24-bit Digital-to-Analog Converter (DAC) further contributes to the exceptional sound quality, providing detailed and nuanced audio playback that brings music to life.

Another notable characteristic of the CDC-697 is its intuitive user interface. The front panel is designed for ease of use, featuring clearly marked buttons and an informative display. Users can quickly navigate through their CD collection and select tracks effortlessly, thanks to the quick access controls. The unit also supports a variety of playback modes, including random, repeat, and program playback, allowing users to personalize their listening experience.

The CDC-697 boasts a sleek and elegant design, typical of Yamaha's commitment to aesthetics and functionality. Its compact size allows it to fit seamlessly into any audio setup, whether it's a dedicated stereo system or a multi-room configuration. The build quality is robust, ensuring durability and longevity for years of enjoyment.

Connectivity is another strong point of the CDC-697. It includes standard audio output options, such as RCA connections, making it compatible with most amplifiers and receivers. Additionally, the remote control allows for convenient operation from a distance, adding to the overall user experience.

In summary, the Yamaha CDC-697 is a versatile and feature-rich CD changer that caters to discerning listeners seeking high-quality sound and user-friendly operation. Its blend of innovative technologies, impressive audio performance, and sleek design make it an excellent choice for those who appreciate the art of music playback.
Top Page Image Contents