Loudspeaker impedance matching, Soft Clipping

High Current and Headroom: Designing for Real-Use Conditions

Since amplifiers are usually rated in terms of a few standard specifications (e.g. 8-ohm power and THD), many designers concentrate on optimising test-bench performance. But in the real world, amplifiers are connected to loudspeakers with complex impedances, not to 8-ohm test resistors, and they are used to play music, not sine-wave test tones. In NAD amplifiers every circuit is designed to deliver full performance under real-use conditions. While many specific engineering goals follow from this principle, two have been the cornerstones of every amplifier in NAD history (including the legendary Model 3020): graceful handling of dynamic transients that exceed the amplifier’s rated power, and the ability to deliver large bursts of output current to the loudspeakers. Electrical power is the product of voltage and cur- rent, but it is the current flowing through the voice coil that causes a loudspeaker cone to vibrate and reproduce sound. As NAD engineers have always known and other manufacturers have lately begun to realise, to obtain precise electromagnetic control of the speaker’s motion the amplifier must be able to supply high peak currents upon demand, unconstricted by transistor “protection” circuits. The NAD 2155 amplifier circuit produces peak currents of up to 40 amperes per channel.

Loudspeaker impedance matching

Standard lab tests of amplifiers use 8-ohm resistors in place of loudspeakers. But most loudspeakers have a lower and more complex impedance that increases the required amplifier output current. (And if you connect two pairs of loudspeakers, the effective impedance of the pair is halved.) For this reason the 2155 amplifier is designed to deliver its maximum power into low impedances of 4 or even 2 ohms. But the exclusive NAD impedance selector allows you to re-optimise the amplifier circuit to produce greater output voltage, for the most effective delivery of power to loudspeakers whose true impedance is 8 ohms or higher.

Soft Clipping

NAD’s trademarked Soft Clipping circuit gently limits the waveform when the amplifier is driven beyond its maximum power rating. By preventing the out-put transistors from being driven fully into saturation, the Soft Clipping reduces the harshness that is normally heard when an amplifier is over driven. Because of this and the amplifier’s high dynamic headroom, the sound remains clean and musical even at very high sound levels, rather than becoming harsh as in other amplifiers.

Exceptional Performance and Value

The NAD 2155 is a superb general-purpose power amplifier with an unusually attractive ratio of performance and power to price, and it is also the core of the unique NAD building-block concept that allows the stereo system to evolve with your needs or your budget, now and in the future.

2155 specifications

NAD 2155 is a noteworthy product in the realm of audio amplification, recognized for its exceptional performance and user-friendly design. It is a powerful stereo receiver that integrates a range of advanced technologies to deliver high-quality sound. The NAD 2155 is particularly well-regarded for its versatility, making it suitable for both casual listeners and audiophiles alike.

One of the standout features of the NAD 2155 is its robust power output. It is designed to provide significant wattage per channel, ensuring that even demanding speakers receive adequate power for optimal performance. This power capability allows the NAD 2155 to handle dynamic musical passages without distortion, providing a rich, full-bodied sound that enhances the listening experience.

In terms of technology, the NAD 2155 employs Pulse Width Modulation (PWM) in its amplifier design. This allows for more efficient power management, resulting in less heat generation compared to traditional linear amplifiers. As a result, the NAD 2155 operates cooler and can maintain consistent performance even during long listening sessions.

Moreover, the receiver features a high-quality Digital-to-Analog Converter (DAC) that improves the clarity and detail of audio playback. This component is crucial for ensuring that digital music sources are translated into sound with precision, enhancing the overall sound fidelity. The NAD 2155 supports various inputs, including HDMI, optical, and coaxial connections, making it compatible with a broad range of modern audio devices.

Another aspect that sets the NAD 2155 apart is its intuitive interface. The front panel is equipped with easy-to-navigate controls, allowing users to adjust settings seamlessly. An included remote control further enhances convenience, providing access to all features from a distance.

The NAD 2155 also emphasizes build quality. Constructed with durable materials, the chassis minimizes vibration and interference, which contributes to clearer sound reproduction. Its design is both sleek and functional, allowing it to blend seamlessly into any home entertainment setup.

Overall, the NAD 2155 is a versatile, powerful, and well-designed audio receiver that caters to a variety of listening preferences, making it a valuable addition to any audio setup.