Viewing VHS and Laserdiscs
1.Turn on Elmo.
2.Select AV2 located under Input on the Elmo Base.
3.Turn on Projector.
4.Turn on Either the VCR or the Laserdisc Player. ( DO NOT TURN ON BOTH OF THEM TOGETHER. When they are both on the projected image is distorted by static. )
5.Turn on the AIWA Tuner ( In C2 the Tuner is SONY instead of AIWA ).
6.Press button labeled Video 1/5.1 ch.
7.Insert your VHS tape or Laserdisc and press play.
8.Adjust volume on the Tuner – Master volume control is a big round knob on the right side.