EBD331e
4.Insert the supplied 4 Anchors into the 4 holes on the ceiling / wall.
5.Screw the Camera Base to the ceiling / wall using the supplied 4 Screws.
a.If you want to wire the cables from the side cut of the Camera Base, run the cables through the Camera Base first, attach and then screw the Camera Base to the ceiling / wall.
b.If you want to wire the cables through the wall, attach and then screw the Camera Base to the ceiling / wall. Attach the Camera Body to the Camera Base.
6.Connect the camera to the 12V DC power source using the supplied Power Adapter Pigtail or a power adapter.
7.Connect the camera to a DVR or a portable monitor using the
Video‐Out cable for viewing the camera view while adjusting camera angles.
8.Screw back the Outer Housing and adjust the camera angle simultaneously.
9.Screw back the Set Screw using the supplied Hexagon Wrench.
5