Elmo TSE270X, TSE272X, TSE271X instruction manual Part Names And Functions

PART NAMES AND FUNCTIONS

2

41

3

2

1Lens mount

Mount a CS-mount lens.

2Camera mount

For mounting a camera on wall, housing, etc. (1/4"-20UNC thread)

3Focusing dial

For fine-adjustment of the lens back-focus.

4IRIS terminal

Connect when an automatic iris lens is used.

5VIDEO OUT terminal

Connect to a monitor TV, etc. (BNC connector)

6AC power terminal

Connect this to optional AC 24V power supply.

7Ground terminal

Connect this to the ground wire of the power supply cord.

8DC power terminal

Connect this to optional DC 12V power supply.

9Power cord

Connect this to AC120V power supply.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND.

10Camera control switches

Refer to "CAMERA CONTROLS." on page 6.

10

MODEL TSE270X

5

6 7

MODEL TSE271X

5

8

MODEL TSE272X

5

9

- 3 -