Changing Resolutions, Video Recording Mode

Video Recording Mode

Press and hold the Shutter Release button. The camera will record continuous video until you release the button. When recording, the LED light on the front panel will stay on continuously.

Continuous snap shot mode

The continuous snap shot mode allows you to set a time between continuous snap shots. The camera will continue to take pictures until either the memory is full, or you cancel the operation. Press and hold the Mode button for 3 seconds. The

"" sign will start blinking. Press the Forward "" or

Backward "" buttons to set the time interval between snapshots. The timed interval can be set from 1 to 60 minutes. Press Shutter Release button to apply setting changes. Then press the Shutter Release button again to start the continuous mode snap shots. Press the Power button to stop shooting.

Changing Resolutions

The DSC-100 takes all images at 352x288 resolution. Changing the image quality will change the compression rate to make smaller image files. Taking pictures at the Low setting will allow you to hold more photos on the camera. Once the camera is full, you will need to download your photos to your computer and erase the photos on the camera.


Press the Forward "	" button to change to the next image quality.
High image quality		=
Low image quality		=