Q & A
Power not turned on
•Ensure the correct connection between the battery. Check the connection.
•Check whether the batteries are full. Use full batteries instead.
The camera can not turn on
•Check whether the batteries are full. Use the new batteries instead.
•Carrying the camera suddenly from a cold location into a warm place will cause condensatin to form on the inside of the camera.Wait until the water droplets disappear.
Images can not be shot
•Ensure the correct setting of the mode switch. Check the mode setting.
•Not enough memory on the memory card. Delete some recorded images before use.
Images can not be displayed on the LCD
•Check whether the LCD is set to “OFF”, and press the MENU/DISP button longly to turn on it.
Images can not be played back
•Check the existence of the memory card in the camera.
•No images on the memory card.
•Mode switch not yet turned to “PLAY”.
Images can not be played back on a TV set
•Ensure the correct connection between the camera and the TV set.
•Check whether the two broadcast signal settings match.
•Set your TV set to video input mode.
Images can not be transferred to a PC
•Ensure the correct connection between the camera and the PC.
•Check whether your PC recognizes the camera.
•If your PC's OS is windows 98, check whether the mass storage driver has been installed in your PC, otherwise install the driver.