Yamaha RX-V340RDS owner manual Next, SET Menu -/+

Page 7

wSTEREO (EFFECT)

Switches between normal stereo and DSP effect reproduction. When you select STEREO, the unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effects, to the main left and right speakers.

ePROGRAM l / h

Select the DSP program.

rA/B/C/D/E

Selects preset station groups A to E when the unit is in tuner mode.

NEXT

Selects the set menu mode when the unit is not in tuner mode.

tPRESET/TUNING l / h

Select preset station numbers 1 to 8 when a colon (:) is displayed in the front panel display.

Select the tuning frequency when a colon (:) is not displayed when the unit is in tuner mode.

SET MENU –/+

Adjust settings on the set menu when the unit is not in tuner mode.

yCONTROL

Switches between Bass (low-frequency response) control mode and Treble (high-frequency response) control mode.

uBASS/TREBLE –/+

Increase or decrease low/high-frequency response when the unit is in Bass/Treble control mode. The sound changes 2dB each time you press one of these buttons. Control range: –10 to +10dB.

iINPUT MODE

Sets the priority for the types of input signals (AUTO, DTS, ANALOG) received when one component is connected to two types of input jacks. You cannot set priority for an audio sources if you have selected 6CH INPUT as the input source.

oINPUT l / h

Selects the input source you want to listen to or watch.

p6CH INPUT

Selects the audio source connected to the 6CH INPUT jacks. This selection takes priority over sources selected with INPUT (or the input selector buttons on the remote control).

CONTROLS AND FUNCTIONS

(U.K. and Europe models only)

aRDS MODE/FREQ

Press this button when the unit is receiving an RDS station, to cycle the display mode among PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data service) and/or frequency display mode in turn.

sPTY SEEK MODE

Press this button to set the unit in the PTY SEEK mode.

dPTY SEEK START

Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.

fEON

Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically.

INTRODUCTION

English

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents RX-V340RDS Special Instructions for U.K. Model For U.K. customersContents Sophisticated AM/FM Tuner FeaturesOther features About this manualGetting Started Supplied accessoriesControl Front panel Controls and FunctionsSET Menu -/+ NextMute Remote controlProgram -/+ Handling the remote control Using the remote controlFront panel display Connections Connecting to digital jacksSubwoofer Output jack Connecting video components Connecting a CD player Connecting audio componentsConnecting a CD recorder or MD Recorder Indoor FM antenna included Ground GND terminal Connecting the antennasConnecting the AM loop antenna Frequency Step switch General model onlyDVD/SACD player Connecting an external decoderSpeaker placement Connecting the speakersSpeakers Red positive + Black negative Banana plug Connecting to the Main a Speakers terminalsConnections 10 mm 3/8Center Speaker terminals Main Speakers terminalsRear Speakers terminals Rear speaker system can be connected to these terminalsGeneral model only Connecting the power supply CordsTurning on the power Connecting the AC power cordExit Basic System SettingsUsing the basic menu SetupYES SETSetting speaker output levels Setting the unit to match your Speaker systemFront panel PlaybackON/OFF inward on To select the audio source connected to the 6CH Input jacksTo mute the sound Night listening modeWhen you have finished using this unit BGV background video functionInput modes and indications This mode, the input signal is selectedAutomatically as follows Digital signal Analog signal This mode, only digital input signalsProgram l / h AdventureProg -/+ Selecting PRO Logic or PRO Logic MatrixPlaying Dolby Digital EX or DTS ES Material Normal stereo reproduction Virtual Cinema DSPPress Stereo again to turn the sound effect back on Recreating a sound field Digital Sound Field Processing DSPUnderstanding sound fields Hi-Fi DSP programsFor audio-video sources No to CINEMA-DSPSound design of CINEMA-DSP CINEMA-DSP ProgramsStraight Decode For movie programsDolby Pro Logic + DSP sound field effect Sound field effectsDolby Digital/DTS + DSP sound field effect Dolby Digital/DTS + Matrix 6.1 + DSP sound field effectAM 1530 kHz TuningAutomatic tuning Manual tuningAutomatically presetting stations for FM Stations Presetting stationsA1FM 89.9 MHz Repeat steps 1 to 5 to store other stations Manually presetting stationsC3AM 1440 kHz Tune in to a stationE1FM 87.5 MHz Selecting a preset stationExchanging preset stations Press PRESET/TUNING Edit againReceiving RDS Stations Changing the RDS modeDescription of RDS data EON function To cancel this functionPress PTY Seek Mode to set the unit PTY Seek mode PTY Seek functionSleep 120min L R Sleep TimerCanceling the sleep timer Setting the sleep timerRecording Special considerations when recording DTS materialSET Menu Adjusting the items on the set MenuSet menu list SML Speaker mode settings1A Center center speaker mode LRG1C Rear LR rear speaker mode 1B Main main speaker mode1D Bass bass out mode Dynamic range Setting by metersSetting by feet Speaker distanceHeadphone tone control Initial input modeSound 5 Center GEQ center Graphic equalizer Input 1 I/O Assign input Output assignment50dB Memory guard20dB Adjusting the volume during Playback Setting the Speaker LevelsUsing the test tone Select a sound field program Changing parameter settingsSound Field Program Parameter Editing Repeat steps 1 3 if you wish to alter other parametersCT Width Center width From main left and right speakers, initial setting isDigital sound field parameter descriptions For 5ch StereoGeneral TroubleshootingEffect speakers No sound / weakSound from particular Speakers No sound fromHumming sound can Volume level cannotOther settings on Unit cannot be changed Unit does not Into standby modeTuner Remote controlGlossary Sampling frequency and number Quantized bits PCM Linear PCMSpecifications WB14590

RX-V340RDS specifications

The Yamaha RX-V340RDS is a well-regarded AV receiver that debuted in the early 2000s, making its mark in the home theater community for its impressive audio quality and versatile features. Designed to cater to audiophiles and casual listeners alike, the RX-V340RDS offers a blend of modern technology and user-friendly functionality, ensuring a satisfying home entertainment experience.

One of the standout features of the RX-V340RDS is its powerful amplification system, which delivers 5.1 channels of rich, immersive sound. With a solid output of 100 watts per channel, the receiver ensures that every audio detail is reproduced with clarity and depth, making it suitable for everything from music playback to movie soundtracks. The inclusion of RDS (Radio Data System) technology enhances FM radio functionality, allowing listeners to access station information directly on the receiver's display.

The RX-V340RDS boasts a comprehensive range of audio processing options, including Dolby Pro Logic II, which expands stereo sources into full surround sound. This feature enhances the listening experience by creating a more realistic sound environment, ensuring that viewers can fully appreciate the nuances of dialogue and sound effects in films. Additionally, users can enjoy compatibility with various surround modes, providing flexibility in tailoring the audio output to suit personal preferences.

Connectivity options are robust, featuring several input and output options including multiple analog audio inputs, composite video inputs, and digital audio inputs for enhanced versatility. The receiver is equipped with an easy-to-navigate interface, facilitating seamless integration with a variety of source devices such as DVD players, gaming consoles, and more. The inclusion of a front-facing headphone jack adds convenience for private listening sessions without disturbing others.

Other notable characteristics include a comprehensive on-screen display that simplifies the setup process and allows users to easily manage settings. Yamaha's commitment to quality is evident in the RX-V340RDS's build, with high-quality components designed to minimize interference and deliver clear sound.

In summary, the Yamaha RX-V340RDS stands out for its solid performance, versatility, and ease of use. It is a perfect choice for those looking to elevate their home entertainment system while enjoying excellent sound quality and user-friendly features. Perfectly suited for both music lovers and movie enthusiasts, this receiver continues to be a popular choice in the world of home audio.
Top Page Image Contents