Charging Accessories
Designed to work as a total system with the 2- way radio and battery, Motorola original chargers maximise the battery life and keep batteries in tip- top condition. Choose from the single tri-chemistry single/multi unit charger to the sophisticated 6-slot battery maintenance system that provides battery health diagnostic and re-conditioning capabilities.
Single Unit Tri-chemistry, Rapid Rate
Utilise an enhanced charging algorithm that helps maximise the life of your batteries. Compatible for NiCd, NiMH and Lilon batteries. Nickel- based batteries will be fully charged in approximately 90 minutes (depending on battery capacity). Full charging of Lilon batteries may take approximately 3 hours. Allows battery only or radio/battery combination charging.
PMTN4024A | Single Unit Rapid Charger |
| 110V | – US plug |
PMTN4025A | Single Unit Rapid Charger |
| 230V | – Euro plug |
PMTN4026A | Single Unit Rapid Charger |
| 230V | – UK plug |
Single Unit Conditioning Chargers
Utilise enhanced pulse charging interpersed with regular discharge pulse current to minimise “memory-effect” and overheating of NiCd and NiMH batteries. A standard capacity battery takes approximately 90 minutes for a full charge. Pulse maintenance charging after a full charge maintains peak capacity for the battery.
WPLN4107BR | Single Unit Conditioning Charger |
| 110V | –US plug (Battery adapter included) |
WPLN4106BR | Single Unit Conditioning Charger |
| 230V | –Euro plug (Battery adapter included) |
3080384G15 | Cigarette Light Adapter |
WPPN4065BR
4
4-Slot Conditioning Chargers
Choose also from the four slot multi-conditioning chargers that utilises regular pulse current to minimise “memory-effect” and overheating of Nickel-Based batteries. Full charging in approximately 90 minutes. Batteries must be removed from radios to perform conditioning charging since radio contacts must be used.
WPPN4065BR | 4-Slot Multi Conditioning |
| 110V –US cord (Battery adapter not included) |
WPPN4076BR | 4-Slot Multi Conditioning |
| 230V –Euro cord (Battery adapter not included) |
WPPN4082BR | GP328 Battery Adapter |
| (Order separately) |
impres™ SMART ENERGY SYSTEM
The impres smart energy system ensures maximum talk-time and optimized battery cycle life through the use of its advanced charging algorithm and automatic reconditioning features. The smart energy system reconditions impres batteries when they need it, automatically, keeping them in peak condition. Its advanced conditioning features allow batteries to be safely left on the charger for extended periods of time without incurring the damaging heat build-up which can rob batteries of cycle life. In addition, batteries left on the charger are kept fully charged so they are always ready when you need them. The impres system reconditions batteries when they need it based on their usage pattern. Talk time and cycle life are optimized and the need for manual maintenance programs reduced or eliminated. Although complete smart features are realised only when using impres batteries and chargers, together impres chargers can also handle legacy batteries; in fact, the multi-unit chargers can simultaneously charge legacy and impres batteries.
impres™ SINGLE UNIT CHARGER
WPLN4182A impres™ Single Unit Charger 110V US Plug
WPLN4183A impres™ Single Unit Charger 230V UK Plug
WPLN4184A impres™ Single Unit Charger 230V EU Plug
WPLN4185A impres™ Single Unit Charger AUST Plug
impres™ MULTI-UNIT CHARGER
WPLN4187A impres™ Multi-unit Charger US Cord
WPLN4188A impres™ Multi-unit Charger UK Cord
WPLN4189A impres™ Multi-unit Charger EU Cord
WPLN4190A impres™ Multi-unit Charger AUST Cord
WPLN4145A impres™ Multi-unit Charger KOREA Cord
WPLN4182A
WPLN4187A