•••••••••••••••••••••••
| Compose picture, confirm focus | |
| 2 indicator. and shoot. | |
| • Each time the shutter release button is depressed, | |
| correct EV, under EV, and over EV exposure are | |
| performed in that order while the blinking electronic | |
| analog exposure display shows the correct, under, | |
Electronic analog | then overexposure. Compensated shutter speed | |
and aperture values are displayed during shooting. | ||
exposure display | ||
First shot | • If the Exposure Compensation function (page 61) is | |
also set, bracketing will be combined with the | ||
(correct EV) | ||
Exposure Compensation values. It is useful to | ||
| ||
| perform Bracketing with a compensated value of | |
| over +2 EV or under - 2 EV. | |
Second shot | • If the end of the film roll is reached during | |
bracketing, the remaining shots can be taken after | ||
(under EV) |
----new film has been loaded . Also, if you turn the
': ': | +2.1.0.1.2- | ~ | power switch off during bracketing, the remaining |
_1.'- | . _ | ~ | shots can be taken after the power is turned back |
|
|
| |
| Third shot |
| on . |
(over EV)
3 Auto Exposure Bracketing is completed and automatically canceled when the third shot is taken.
• ~ and ml in the LCD panel and ~ and the electronic analog exposure display in the viewfinder disappear when the bracketing is completed.
• To cancel the bracketing, rotate the Command Dial while pressing the" button so the display disappears from the LCD panel. Bracketing is not canceled by turning the power switch off.
Check points
•Auto Exposure Bracketing cannot be performed in 8 (AUTO mode) and Vari- Program.
•Auto Exposure Bracketing and Multiple Exposure (page 64) cannot be set simultaneously.
•Auto Exposure Bracketing and Long Time exposure (page 60) cannot be set simultaneously.
63