Metz SF 63TG62 Programme position, Management, Select programme position, Next programme

Page 6

2. Programme selection

Programme position

management

 

 

This TV set can manage up to 225 TV programme positions. If you are connected to a cable network or use a terrestrial aerial, you will not need all of these positions at the moment. If, however, you have a SAT upgrade kit installed, the number of programmes can increase drastically. We do not know how many programmes will be available in the future. For this reason, we have provided plenty of programme positions in reserve. For selection of the desired programme position, we have invented a simple input method which saves you having to enter three digits for each position.

The first digit you enter is normally the hundreds digit. If, however, you have less than 100 programmes stored, this digit auto- matically moves to the tens position. If you have less than ten programmes stored, it moves to the units position.

Example: you have stored programmes in positions 1 to 35 and you want to select position 3. Press the keys and or simply and confirm with OK . Programme position 4 can be selected by simply entering , since there are no programme positions higher than 39. Further examples are shown in the following text.

Press this key on the remote

control....

1.Select programme position

2 (only the first 9 programme positions in the station table are occupied)

2

2.Select programme position 25 (only the first 99 pro- gramme positions in the station table are occupied)

2

5

The screen displays

Pr 2

MONO

ZDF 18:15:33

Pr 25 MONO

S-RTL18:15:48

Explanation

Only the programme positions 0-9 in the station table may be occupied if a programme is to be selected by pressing one numeric key.

Pressing the numeric key opens a time-delay win- dow* which waits for 3 seconds for the input of further digits. If no further numeric key is pressed, the TV set switches to the programme position selected with the first digit.

*The operating mode of this time delay window can be changed: see page 18, item 5, „PC time out“.

Only the programme positions 0-99 in the station table may be occupied if a programme is to be selected by pressing two numeric keys.

After a programme has been selected successfully, a box containing the programme position number, the time and the current sound mode (e.g. stereo) is displayed on the screen.

To select a programme position with only a single-digit

number, you must enter

before the related digit,

e.g.

and

; alternatively, you can press

and

then press

OK .

 

 

3. Select programme position

101 (more than 100 pro-

gramme positions in the

station table are occupied)

1 0 1

4. Next programme

P+

P-

Pr 101 MONO

Nord3 18:15:48

Pr 3

MONO

Bayern 3 18:15:48

ZDF

BR3

RTL

SAT1

RTL2

PRO7

EUSPO NTV NORD3 MDR3 SWF3

In this case, more than 100 programme positions in the station table are occupied, which means that you have to press three numeric keys.

After a programme has been selected successfully, a box containing the programme position number, the time and the current sound mode (e.g. stereo) is displayed on the screen.

To select a programme positions with a single-digit or

two-digit

number,

you must

enter

before the

related digit(s), e.g.

and

; alternatively, you

can press

and then press OK .

 

You can step sequentially through the programme

positions with the P+ P- keys. If either of these keys is held down for more than two seconds, a programme box for selection of the desired programme is displayed on the screen. Release the P+ or P- key as soon as the desired logo is highlighted in white: this programme position will then be selected.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents TV. VIDEO. AUDIO. Mecablitz Contents Hints for use of the Operating Instructions10 0 H z Remote control handset RBRB11 PRGConnecting the aerial Setting up and connectingSetting up Mains voltageTurning the TV on and off TV menuSelect programme position Programme positionManagement Next programmeProgramme selection TV menu and operator helpTV-menu Colour and transmission ExampleStation search Store the setting and return to TV pictureDirect channel entry Direct channel input Station searchSorted to countries Station settingsAutostore function AutostorePositions Store the settingsSorting stations Return to TV pictureFine tuning Select the fine tuning functionAdjust the fine tuning Call the logo menu Allocating a station logoTV station table Select the first characterChanging individual picture settings Changing individual sound settingsCall the TV menu Audio standard valuesControl Screen displays Explanation Menu item „colour balance is displayed onlyLeft-hand side of this menu shows the currently AssigningFunction keys Call the „Function keys menuSelect the function in the right-hand field with the P+ „SubtitlesProg. change settings Settings forEquipm. configuration Set the PC „time out GreenSet forced mono Yellow Volume adjustment and forced monoActivate forced mono sound mode Our exampleCorrecting picture deviations TV station tableAdjust the colour offset or contrast Store all settings and return to TV pictureChange the picture format Green Camcorder video recorder AV recordingAV-recording Call the AV menuAV recording Video recorder video recorder LogicVTRTime settings Time settingsSwitch-on/off Reminder time Call the „Time settings menuSwitch to standby mode HalloReminder time can be deleted with the C key Childlock Switching onChildlock Manually in the meantimeActivate the childlock Switching offEnter your personal code With Key or with the ON/OFF keyTimers can be programmed up to 2 months in advance Recording with the timerTimer recording Call the „Timer recording menuVolume Connecting headphonesHeadphones Phones volumeCall Hi Text Select a subject Hi TextBasic functions Select a chapterHi Text Page-by-page pagingSelecting subpages Multiple pagesSelection by cursor If there are more than 5 subpages, the cursor whiteDirect page selection Return to last indexDoubling the font size Return to normal font sizeSetting marks Set the first markSelect the next page e.g Service Set the second markInfotext Mark by mark paging From TV picture to the first markStep forward to the next mark Erasing marks Erase the markMark 2 on text Subtitles Riddle solutions keyAccess to riddle solutions AutomaticSwitch off the zoom function Variable ZoomStill picture Operation without remote controlVolume Programme selectionUnit into your eyes and press a Nota Do not point the remote controlRies in the remote control unit Key on itEuro or Scart cable CamcorderTV set, rear view Camcorder video camera Video recorder, rear viewDifferences between the signal types Connecting externalChange the signal type DevicesConnecting a video recorder via the aerial socket Menu return TV pictureProgramme position Press the TV Video signal is normally supplied directly by the aerial Store the setting and return to the TV pictureVideo recorders Connecting peripheral equipment Pay-TV decoder FullyPay-TV decoder Video signalSelect video signal „via decoder Station tableTechnical data GuaranteeUpgrade kits Glossary Data Logic For terrestrial orUpgrade kits IndexCleaning notes for glossy surfaces Troubleshooting and care of the setCleaning the set RepairsMetz. Always first class
Top Page Image Contents