Nikon WT-4 manual Get Ready, Equipment

1: Get Ready

1: Get Ready

Equipment

Ready the following:

•A WT-4 wireless transmitter *

•A fully-charged EN-EL3e battery for the WT-4

•A Nikon D3 or D300 digital SLR camera

•A fully-charged battery for the camera (an EN-EL4a for the D3, a EN-EL3e for the D300)

•A computer with Mac OS X (10.5.2) *, the WT-4 Setup Utility* installed

•A memory card

•A USB cable

•Manuals for the above equipment

Network Settings

Note the IP addresses, encryption, and other settings that will be used in the wireless LAN. The following are intended as examples only.

•IP address for the WT-4: 192.168.1.4

•IP address for the computer 192.168.1.3

•Subnet mask: 255.255.255.0

•Network name (SSID): WT-4

•Communication mode: Ad hoc

•Channel: 1

•Authentication: open system

•Authentication: WEP64

•Encryption key: abc12

•Key Index: 1

* WT-4 firmware version 1.1 and the WT-4 Setup Utility version 1.1 are required when using the WT-4 under Mac OS X version 10.5.2. Updates to the WT-4 firmware and Setup Utility are available on the Nikon website for your area.