Moultrie I40XT warranty Resolution

IR Test (default off) - The IR Test function can be turned ON to test the sensing range of the camera. With IR Aim ON the LED on the front of the camera will flash each time the camera detects presence; however, a picture will not be taken.

Info Strip (default on) -When the Info Strip is turned ON, the information strip, as described in the Advanced Setup section of this manual, is printed on the photos. When the Info Strip is turned OFF, the photo contains no information strip. Press OK on the INFO STRIP screen. Press UP or DOWN button to change the value. Press Enter again to select value.

Plot Frequency (default 15 seconds) - When Plot Mode functionality is enabled, the camera will take photos at either 10, 15, 30, or 60 second intervals. To change photo Frequency, press the OK button on the Plot Frequency screen and press UP or DOWN to select the interval.

Plot Duration (default 3 hour) - When Plot Mode functionality is enabled, the camera will capture interval photos for the Plot Duration number of hours after dawn or dusk. The Plot Duration number of hours can be set to 1, 2, 3, 4 hours, or all day.

Default Settings (default no) -To restore all the settings back to the factory default, press the OK button on the DEFAULT SETTINGS screen. Press the UP or DOWN button to change the value to YES and OK to activate.

Delete All? (default no) -To remove all the images from the internal memory or on the SD card, press the ENTER button on the DELETE ALL screen. Press the UP/DOWN button to change the value to YES and SELECT to delete all photos.

DELETE ALL?

Flash (default on) -To modify the Flash setting, press the OK button on the FLASH screen. Press UP or DOWN to switch between FLASH ON and FLASH OFF and press OK again to select desired setting.

I40XT GameSpy Digital Camera

VI

MFH-I40XT

I40XT GameSpy Digital Camera